Shuttle

PC850

850 Watt Power Supply Upgrade Kit for Shuttle XPC Cubes

The Shuttle XPC Accessory PC850 is an internal AC to DC switching power supply unit (PSU) meant as upgrade kit for certain Shuttle products. This power supply is guaranteed to deliver an excess of power for power-hungry processors and graphics cards. It provides a maximum output wattage of 850 Watt. Its 80 PLUS® Platinum and Energy Star V5.0 compliance helps save on energy costs as compared to previous power supply models.

  • Compatibility
    Compatible with the following Shuttle XPCs in cube form factor:
    - SH510R4
    - SH570R6 (Plus)
    - SH570R8
    - SW580R8
    - SH310R4V2 with Serial No. SH310V20501...
    - SH370R6V2 with Serial No. SH370V20801...
    - SH370R6V2 Plus with Serial No. SH370V20901...
    - SH370R8 with Serial No. SH370R80701...
  • Package contents:
    -
    Internal power supply (850 W)
    - angle holder with screw
    - Quick guide
  • AC Input
    Input voltage: 100 - 240 V AC (auto-adjust), 50 - 60 Hz
    Input current: max. 10.0 - 6.0 A
    Active Power Factor Correction (PFC) meet EN61000-3-2
    AC Input Connector: Cold-device plug, 3-pin with PE (IEC-60320/C14)
  • DC Output Voltages
    Output voltage (max. output current):
    +3.3V (20A), +5V (20A), +12V (70.8A), -12V (0.5A), +5Vsb (3A)
    Low ripple: 120 mV P-P for 12V and 50 mV P-P for 3.3/5V
    Rise time: less than 20ms
    Hold-up Time: 17 ms minimum at nominal input voltage for 75% maximum load
    Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
    Leakage Current: Less than 3.5mA at 264Vac, 63Hz
  • Maximum Output Power
    +3.3V and +5V combined power: max. 100 W
    Total power output: max. 850 W
  • DC Output Connectors
    1x main mainboard connector (20-pin ATX)
    1x mainboard AUX connector (4-pin ATX 12V)
    4x Serial ATA power connectors (15-pin SATA)
    2x PCIe power with 6+2 pins (for graphics card)
    2x 4-pin WST connector with 12V (reserved)
    1x PMBus data cable, 5-pin (reserved)
  • Cooling Fan
    40 mm ball-bearing fan
    at output side for better acoustic quality
  • LED Indicator
    LED off/blinks/green/red: Off/Standby/Ok/Failure
  • Dimensions
    220 x 81.5 x 40.5 mm (LWH), Flex ATX form factor
  • High Reliability
    - MTBF: 100,000 hours at 25 °C, max. output load
    - Short circuit protection on all outputs
    - Over Current Protection (OCP)
    - Over Temperature Protection (OTP)
    - Over Voltage Protection (OVP)
    - Dielectric Withstand: Primary frame ground 1800V AC for 2 second
  • Efficiency
    typical > 92% Efficiency, meets 80 Plus Platinum criteria
    90% / 92% / 89% at 20% / 50% / 100% PSU load
  • Environmental criteria
    Operating: 0 to 50 °C, max. 90% RH non-condensing
    Storage: -20 to 80 °C, max. 90% RH non-condensing
    Operating altitude: max. 5,000 meters above sealevel
  • Compliance and Logos
    CE, TUV, FCC, UL/cUL, CCC, CB 62368-1 & CB 60950-1
    Energy Star 5.0 & ErP, 80 PLUS® Platinum
  • PSU manufacturer
    Fortron Source Technology (FSP Group), 
    Product ID of manufacturer: FSP850-50FGPH3
    (with modified cable lengths and number of connectors)