PC850
850 Watt Power Supply Upgrade Kit for Shuttle XPC Cubes
- Compatibility
Compatible with the following Shuttle XPCs in cube form factor:
- SH610R4
- SH510R4
- SH570R6 (Plus)
- SH570R8
- SW580R8
- SH310R4V2 with Serial No. SH310V20501...
- SH370R6V2 with Serial No. SH370V20801...
- SH370R6V2 Plus with Serial No. SH370V20901...
- SH370R8 with Serial No. SH370R80701... - Package contents:
- Internal power supply (850 W)
- angle holder with screw
- Quick guide - AC Input
Input voltage: 100 - 240 V AC (auto-adjust), 50 - 60 Hz
Input current: max. 10.0 - 6.0 A
Active Power Factor Correction (PFC) meet EN61000-3-2
AC Input Connector: Cold-device plug, 3-pin with PE (IEC-60320/C14) - DC Output Voltages
Output voltage (max. output current):
+3.3V (20A), +5V (20A), +12V (70.8A), -12V (0.5A), +5Vsb (3A)
Low ripple: 120 mV P-P for 12V and 50 mV P-P for 3.3/5V
Rise time: less than 20ms
Hold-up Time: 17 ms minimum at nominal input voltage for 75% maximum load
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 63Hz - Maximum Output Power
+3.3V and +5V combined power: max. 100 W
Total power output: max. 850 W - DC Output Connectors
1x main mainboard connector (20-pin ATX)
1x mainboard AUX connector (4-pin ATX 12V)
4x Serial ATA power connectors (15-pin SATA)
2x PCIe power with 6+2 pins (for graphics card)
2x 4-pin WST connector with 12V (black/yellow)
1x PMBus data cable, 5-pin (reserved) - Cooling Fan
40 mm ball-bearing fan
at output side for better acoustic quality - LED Indicator
LED off/blinks/green/red: Off/Standby/Ok/Failure - Dimensions
220 x 81.5 x 40.5 mm (LWH), Flex ATX form factor - High Reliability
- MTBF: 100,000 hours at 25 °C, max. output load
- Short circuit protection on all outputs
- Over Current Protection (OCP)
- Over Temperature Protection (OTP)
- Over Voltage Protection (OVP)
- Dielectric Withstand: Primary frame ground 1800V AC for 2 second - Efficiency
typical > 92% Efficiency, meets 80 Plus Platinum criteria
90% / 92% / 89% at 20% / 50% / 100% PSU load - Environmental criteria
Operating: 0 to 50 °C, max. 90% RH non-condensing
Storage: -20 to 80 °C, max. 90% RH non-condensing
Operating altitude: max. 5,000 meters above sealevel - Compliance and Logos
CE, TUV, FCC, UL/cUL, CCC, CB 62368-1 & CB 60950-1
Energy Star 5.0 & ErP, 80 PLUS® Platinum - PSU manufacturer
Fortron Source Technology (FSP Group),
Product ID of manufacturer: FSP850-50FGPH3
(with modified cable lengths and number of connectors)