• Chassis
  Slim chassis design, colour: black
  Dimensions: 237 x 200 x 95 mm (LWH) = ca. 4.5-litre
  Overall length including PCIe slot mounting and thumb screws: 250 mm
  Weight: 1.9 kg net, 3.5 kg gross
  Hole for Kensington Lock at the backpanel
  Operation position horizontal or vertical with the included VESA mount
• Power Adapter
  External 180 W power adapter (fanless)
  Input: 100~240 V AC, 50~60 Hz, max. 2.5 A
  Output: 19.5 V DC, max. 9.23 A, max. 180 W output wattage
  AC Connector with protective-earth contacts, cable length: 1.7 m
  DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
• Operating System
  This system comes without operating system.
  It is compatible with Windows 11 and Linux (64-bit)
• Processor support
  Processor Socket LGA1851
  Supports Intel Core Ultra 200 series 9/7/5 processors
  Code name "Arrow Lake-S"
  Maximum supported processor power consumption (Base TDP) = 65 W
  Does not support the unlock-function of Intel K-Series processors.
  Up to 24 cores (8 Performance-cores and 16 Efficient-cores)
  Neural Processing Unit (NPU) with 13 TOPS AI-Performance
• Processor heat-pipe cooling
  Processor cooling with heat-pipe technology and two fans (6cm)
• Mainboard / Chipset / BIOS
  Mainboard in Mini-ITX form factor 17 x 17 cm
  Chipset: Intel® B860
  AMI BIOS in 32 MB EEPROM
  All capacitors are high quality solid capacitors
  Supports hardware monitoring and Watchdog functionality
  Supports Unified Extensible Firmware Interface (UEFI)
  Supports power on after power failure [1]
  Supports Firmware TPM v2.0 (fTPM)
• Memory support
  2x SO-DIMM slot with 262 pins
  Supports DDR5-5600 (PC5-44800) SDRAM at 1.1 V
  Supports Dual Channel mode
  Supports a maximum of 48 GB per DIMM,
  maximum total size: 96 GB
  Note: Supports two unbuffered DIMM modules (no ECC or registered)
• Integrated Graphics
  The features of the integrated Intel graphics function with Xe cores
  depend on the processor type used. [4]
  The PC features these graphics outputs:
  - HDMI 2.1 supports 8K UHD with max. 7680x4320 Pixel at 60 Hz (4320p60)
  - HDMI 2.0 supports 4K UHD with max. 4096x2160 Pixel at 60 Hz (2160p60)
  - DisplayPort supports 4K UHD with max. 4096x2160 Pixel at 60 Hz (2160p60)
  - optional one analog Sub-D/VGA port (optional Accessory PVG01)
  Supports up to four independent displays with the integrated graphics function.
  If the HDMI 2.1 port is operated with an 8K monitor, the second HDMI port cannot be used.
  DisplayPort and HDMI support multi-channel digital audio over the same cable.
• Two PCIe Expansion Slots
  The pre-installed 90° Riser Card provides two PCI-Express expansion slots:
  1x PCI-Express X16 Gen 5 slot
  1x PCI-Express X1 Gen 4 slot
  Supports dual-slot (double-width) graphics cards (occupies the second PCI-Express slot)
  The used PCIe X16 expansion card must meet the following conditions:
  1) Maximum dimensions: 205 mm x 120 mm x 45 mm
  2) Maximum power consumption: 75 W (optional up to 225 W [8])
  For special purposes, the mainboard provides a 5V auxiliary voltage (max. 2 A) via 4-pin Molex connector.
• Audio Output
  Audio Realtek® ALC 888S High-Definition Audio
  Two analog audio connectors (3.5 mm) on the front panel:
  1) 2-channel line-out (head-phones)
  2) microphone input
  Digital multi-channel audio output: by HDMI and DisplayPort
• Dual LAN Controller
  Dual network with two RJ45 ports with two status LEDs each
  Used network chips:
  1) Intel 226LM (left RJ45 port) supports 100 / 1.000 / 2.500 Mbps data transfer rate
  2) Intel 219LM (right RJ45 port) supports 10 / 100 / 1.000 Mbps data transfer rate
  Supports WAKE ON LAN (WOL) [7]
  Supports network boot by Preboot eXecution Environment (PXE)
• Three M.2-2280M SSD slots
  Three M.2 2280M slots provides the following interfaces:
  - Slot 1: supports PCIe Gen4 x4 (NVMe) and SATA (max. 6 Gbps)
  - Slot 2: supports PCIe Gen4 x4 (NVMe) and USB3.2 Gen2 (max. 10 Gbps)
  - Slot 3: supports PCIe Gen5 x4 (NVMe) - access from the bottom side [9]
  It supports M.2 cards with a width of 22 mm and a length of 80 mm (type 2280).
  Use the supplied heat sink kit to install the M.2 SSD on the bottom side. [9]
• M.2-2230E slot for WLAN cards
  Interfaces: PCI-Express Gen4 X1, USB 2.0 and CNVi
  Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
  Supports WLAN expansion cards
  Optional Shuttle accessory: WLN-M1/M12 [3]
• Front Panel connectors
  Microphone input
  Audio Line-out (headphones)
  1x USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)
  1x USB 3.2 Gen 1 Type C (max. 5 Gbps)
  2x USB 2.0 (black)
  Power button
  Power LED (blue)
  HDD LED (yellow)
• Back Panel connectors
  1x HDMI 2.1 (right side)
  1x HDMI 2.0 (left side)
  1x DisplayPort 1.4a [2]
  2x USB 3.2 Gen 2 Type A (max. 10 Gbps, red)
  2x USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)
  1x 2.5G LAN (RJ45 port, Intel 226LM chip)
  1x Gigabit LAN (RJ45 port, Intel 219LM chip)
  1x DC-input connector for external power adapter (supports 19.5V only)
  1x 4-pin connector (2.54 mm pitch) supports:
  - external power on button (see optional  accessory CXP01)
  - Clear CMOS function
  - +5V DC voltage for external components
  2x Perforation for Wireless LAN antennas
  1x Perforation for optional VGA port (optional Accessory PVG01)
  1x Hole for Kensington Lock
• Other onboard connectors
  Jumper J1 for power-on-after-power-fail (hardware solution) [1]
  Front connectors for power button, LEDs, USBs, audio ports
  4-pin fan connectors (occupied by the CPU cooling system)
  SATA power connectors: 5V (4-pin) and 12V (3-pin)
  Header for an optional VGA port "VGA1" (optional Accessory PVG01)
• Supplied Accessories
  Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
  DVD with Windows 11 driver software and manuals in PDF format
  External power adapter with ca. 1.8m AC power cord (with protective-earth contacts)
  Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
  CPU heatpipe cooling system pre-installed with heatsink compound
  Heat sink kit for SSD card with screws (for the M.2-2280 slot on the underside)
  supplied with four thermal pads, 20x70mm, in various thicknesses [9]
  VESA mount (metal) supports 75x75 and 100x100 mm VESA standard
  Four screws M3 x 5 mm (screws together VESA mount and PC)
  Four screws M4 x 10 mm (to affix VESA mount on the back of a monitor)
  Four screws (M3x5, silver) for installation of three M.2-SSDs and one WLAN card
• Optional Accessory
  - CXP01: adapter cable for external power button
  - PVG01: Adapter for a VGA port
  - WLN-M1/M12 (802.11ax, Wifi 6): WLAN module with two antennas [3]
  - WWN04: Adapter/Antenna kit for 4G/5G expansion card
  - PRC02: Expansion kit to support an additional power adapter (PE90 or PE180) for more powerful graphics cards [6]
• Environmental Specifications
  Operating temperature range: 0~50°C [5]
  Relative humidity range: 10~90% (non-condensing)
• Conformity and Certifications
  EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
  Safety: CB 60950/62368, cTUVus, BSMI
  Other: RoHS, Energy Star, ErP
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
  (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)

[1] Power-on-after-power-fail:
The BIOS setup provides a "power-on-after-power-fail " function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing the appropriate jumper JP1, the system will start unconditionally once power is supplied.

[2] How to convert DisplayPort into HDMI/DVI
The DisplayPort output supports Dual-mode (DP++) and can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter). Please note that DVI/HDMI monitors are only operated in single-link mode, i.e. max. 1920x1200 with 60 Hz.
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.

[3] Optional Wireless LAN module:
This slim PC can optionally be upgraded with WLAN/Bluetooth functionality. Shuttle offers the suitable accessory kit WLN-M1/M12, consisting of a WLAN card in M.2-2230 format and two external antennas with appropriate antenna cables.

[4] Intel processors without integrated graphics (ID ends with "F", e.g. Core Ultra 7 265F) are not compatible.

[5] High ambient temperature
For high ambient temperature over 40°C we strongly recommend to use SSDs instead of hard disk drives.

[6] Expansion Kit PRC02
With the Shuttle XPC accessory PRC02 you can equip this PC with a second DC input to connect a second power adapter. This allows the use of even more powerful graphics cards. Graphics cards with 75W power dissipation are supported as standard. With an additional 90W or 180W power supply unit, this value increases to 150W or 225W.

[7] Note on the Wake-on-LAN function
Summary: Please use the 2.5G network connection for the WOL function.
Explanation: This PC has two network connections (LAN ports):
(1) 1.0G (Intel 219 chip)
(2) 2.5G (Intel 226 chip)
The PC supports the Wake-on-LAN function (WOL) to start the switched-off computer (from S5 mode) via the network. The following settings can be found in the ‘Advanced’ BIOS setup:
(1) Wake Up by LAN = Enabled (this activates WOL)
(2) Power-On after Power-Fail = Power On by LAN
The second setting defines the behaviour after a power failure – in this case, the PC should not switch on immediately as soon as power is restored, but should wait for the power-on signal via the network connection. However, after a power failure, switching on via the network (WOL) only works via the 2.5G network port for technical reasons. Do not use the 1.0G network port for the WOL function if you expect that the PC's power supply could be interrupted.

[8] Expansion Kit PRC02
With the Shuttle XPC accessory PRC02 you can equip this PC with a second DC input to connect a second power adapter. This allows the use of even more powerful graphics cards. Graphics cards with 75W power dissipation are supported as standard. With an additional 90W or 180W power supply unit, this value increases to 150W or 225W.

[9] M.2 slot on the bottom
There is a case cover on the bottom of the PC, under which there is a third M.2 slot for SSD cards in M.2-2280 format. Since this slot is not located in the airflow of the cooling fan (like the other two M.2 slots), this SSD card must be specially cooled. For this purpose, a two-piece heat sink kit with four 20 x 70 mm thermal pads in various thicknesses is included. 
(1) Before installing the M.2 SSD card in the heat sink, a 1.75 mm thick thermal pad must be mounted at the top and at the bottom. If the SSD card is equipped with chips on both sides, then choose the 0.5 mm thick thermal pad for the bottom.
(2) After installing the SSD card in the M.2 slot, mount the 3 mm thick thermal pad on top to create a thermal bridge to the case cover.