SW580R8
  • Chassis
    Black aluminium chassis
    Front panel: brushed aluminium
    Front door for I/O ports (USB and Audio)
    Kensington Security Slot at the backpanel (also called K-Slot
    or Kensington lock) as a part of an anti-theft system
    Dimensions: 33.2 x 21,5 x 19.0 cm (LWH without feet) = 13.6 litre
    Height with rubber feet: 19.7 cm
    Weight: 3.5 kg net / 4.5 kg gross
  • Mainboard / Chipset
    Mainboard with Shuttle form factor, proprietary design for XPC SW580R8
    Chipset/Southbridge: Intel® W580
    Passive chipset cooling with heat sink
    The Northbridge is integrated in the processor.
    Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
  • BIOS
    AMI BIOS, SPI Interface, 16 MB Flash-EEPROM
    Supports Hardware Monitoring, Watch Dog
    Supports Power Fail Resume
    Supports boot up from external USB flash memory
    Supports Unified Extensible Firmware Interface (UEFI)
  • Supports Intel® vPro™ and AMT
    Intel® vPro™ is a brand name for a specific set of management and security technologies. Intel® Active Management Technology (AMT) is a subset of Intel vPro. This technology allows remote management of PCs, even in power-off mode or with non-functional operating systems. You can audit, repair and restore AMT-based platforms in a LAN. These functions can increase the uptime of desktops with lower maintenance costs.
    Note: Intel vPro requires appropriate software and processors.
    The Intel® MEBX configuration user interface can be accessed after pressing CTRL-P at the beginning of the boot process.
    Only Intel Xeon or certain Core i5/i7/i9 processors support the Intel vPro® feature.
    Only the Intel i219 network chip supports the Intel vPro® function. Use the second LAN port from the left for this purpose.
  • TPM Module
    Hardware Trusted Platform Module (Infineon SLB9670VQ2, TPM 2.0)
  • Power supply
    Built-in 500 Watt mini switching power supply [3]
    AC input voltage: 100~240V, 50~60 Hz
    80 PLUS Gold compliant
    Active PFC circuit (Power Factor Correction)
    ATX main power connectors: 2x10 and 2x2-pin
    Graphics power connector: 6-pin and 8-pin
    Other connectors: 4x SATA, 2x Molex
  • Operating System
    This system comes without operating system.
    It is compatible with Windows 10/11 (64-bit) and Linux (64-bit)
  • Processor support
    Processor Socket LGA 1200
    Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
    Supports Intel Xeon W series processors (W12xx and W13xx series)
    Supports the 10th and 11th generation Intel Core processors, code name "Comet Lake" and "Rocket Lake"  in 14++ nm process technology
    Maximum supported processor power consumption (TDP) = 125 W
    Up to 10 CPU cores, 20 threads and 20 MB of L3 cache
    Does not support the unlock-function of Intel K-Series processors.
    The processor integrates PCI-Express, memory controller
    and the graphics engine on the same die.
    However, processors with "F" identifier do not support integrated graphics [2]
    (performance features  depending on processor type)
    Please refer to the support list for detailed processor support information at global.shuttle.com.
  • Heat-pipe processor cooling
    Shuttle I.C.E. (Integrated Cooling Engine)
    advanced I.C.E. heatpipe technology, linear-controlled 92mm fan
    SilentX cooling and noise reduction technology with Active Airflow
  • Memory support
    4x 288-pin slot
    Supports DDR4 memory at 1.2V
    Supports Dual Channel mode
    Supports max. 32 GB per DIMM, maximum total size of 128 GB
    The maximum DDR4 clock frequency depends on the processor type used:
    - Gen. 11 "Rocket Lake" supports DDR4-3200 (PC4-25600U)
    - Gen. 10 "Comet Lake" Core i7/i9 supports DDR4-2933 (PC4-23433U)
    - other Gen. 10 "Comet Lake" support DDR4-2666 (PC4-21300U)
    Supports unbuffered ECC memory in conjunction with Xeon processors
  • PCIe Expansion Slots
    1x PCI-Express x16 v4.0 slot
    (supports PCI-Express v3.0 with Gen. 10 "Comet Lake" processors)
    1x PCI-Express x4 v3.0 slot, open-ended
    Supports dual-slot (double-width) graphics cards (occupies the second PCI-Express slot)
    The maximum size acceptable for display cards is 280 x 120 x 40 mm.
    Graphics power connector: 6-pin and 8-pin [3]
    Please refer to the support list for detailed support information at global.shuttle.com.
  • Integrated Graphics (optional [2])
    The features of the integrated Intel UHD graphics function  depend on the processor type used.
    Certain processor models do not support integrated graphics [2]
    The PC features three video outputs which support 2160p/60 UHD resolution:
    - 1x HDMI v2.0b (only HDMI v1.4b with Gen. 10 "Comet Lake" Prozessoren)
    - 2x DisplayPort v1.4
    Supports displays with 4K Ultra HD resolution at 3840 x 2160 (2160p/60)
    Supports three independent displays with the integrated graphics function
    Supports more displays in combination with a discrete graphics card
    Hardware video decoding/encoding
    DisplayPort and HDMI support multi-channel digital audio over the same cable
  • Drive bays
    Storage bays: 4x 3.5" (internal)
    Using the optional accessory PHD3 two 2.5" drives
    can be installed into one 3.5" bay.
  • SATA connectors
    4x Serial ATA 6G connector onboard (rev. 3.0, max. 6 Gbit/s)
    Supports Intel Rapid Storage Technology (RST) with RAID 0/1/5/10, JBOD)
  • Two M.2-2280M SSD slots
    Provides two internal M.2 2280 M slots für M.2 SSD cards
    Slot 1: supports PCIe Gen. 4.0 X4 with NVMe or SATA v3.0
    (supports only SATA v3.0 with Gen. 10 "Comet Lake-S CPU)
    Slot 2: supports PCIe Gen. 3.0 X4 with NVMe or SATA v3.0
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
  • M.2-2230E slot for WLAN cards
    Interfaces: PCI-Express Gen. 3.0 X1 und USB 2.0
    Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
    Supports WLAN extension cards (optional Shuttle accessory: WLN-M)
  • HD audio
    Audio Codec: Realtek ALC897, 5.1 channel
    Three analog audio connectors (3.5 mm) on the backpanel:
    Line-in (blue), line-out (green) and microphone input (pink)
    shared with 5.1 channel line-out (front, rear, center/bass)
    Front panel: microphone input and head phone output (line-out)
  • Four Network Ports
    Supports four RJ45 LAN ports for Ethernet networking
    Port 1+2: Intel i211 / i219LM - supports 10 / 100 / 1.000 Mbps data transfer rate
    (the LED lights green/orange at 100M/1G speed)
    Port 3+4: Realtek 8125b - supports 10 / 100 / 1.000 / 2.500 Mbps data transfer rate
    (the LED lights green/orange at 1G/2.5G speed)
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Front Panel connectors and buttons
    Microphone input (3.5 mm)
    Headphones output (3.5 mm)
    1x USB 3.2 Gen 1 (5 Gbps), Type C
    3x USB 3.2 Gen 1 (5 Gbps), Type A, blue
    Power button
    Power indicator (Blue LED)
    Hard disk drive indicator (Yellow LED)
  • Back Panel connectors
    1x HDMI 2.0b (HDMI 1.4b with Gen. 10 "Comet Lake" processor)
    2x DisplayPort 1.4 [1]
    4x USB 3.2 Gen 2 (10 Gbps), Type A, red
    4x USB 2.0 (Type A, black)
    2x Gigabit LAN (RJ45)
    2x 2.5G LAN (RJ45)
    Audio Line-out (3.5 mm)
    Audio Line-in (3.5 mm)
    Microphone Input (3.5 mm)
    1x 4-pin connector (2.54 mm pitch) supports:
    - external power on button
    - Clear CMOS function
    - +5V DC voltage for external components
    Optional: Serial RS232 port (Accessory: "H-RS232")
    3x perforation for optional WLAN antennas (Accessory: "WLN-M")
  • Other connectors
    Occupied front panel connectors for USB, audio, buttons, LEDs
    1x RS232 serial interface (2x5 pin header)
    2x fan connectors (4-pin header)
    1x USB 2.0 (4-pin header)
  • Included Accessories
    Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
    Windows 64-bit driver disk
    2x Serial ATA cables
    AC Power Cord (with protective-earth contacts)
    Heatsink Compound
    Protector cap for the CPU socket (do not use if heatpipe or fan is mounted)
    Bag with screws
  • Optional Accessories
    Back panel adapter for serial RS232 port (H-RS232)
    WLAN kit supports WLAN+BT with two external antennas (WLN-M (802.11ac) and WLN-M1 (802.11ax))
    Adapter for 2.5" drives such as SSDs (PHD3)
    Adapter cable for external power button (CXP01)
    850W Power Supply (PC850)
  • Environmental criteria
    Permissible ambient temperature during operation: 0~40 °C
    Relative humidity: 10~90 % (non-condensing)
  • Certifications / Compliance:
    EMI: FCC, CE, BSMI, C-Tick
    Safety: ETL, CB, BSMI
    Other: RoHS, Energy Star 5.0, ErP
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP).

[1] How to convert DisplayPort to HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[2] Integrated graphics is optional
Processors with model numbers ending with "F" (z.B. Intel Core i5-11600F) do not support integrated graphics, so that the graphics outputs of the Shuttle XPC have no function. In this case, an additional discrete PCIe graphics card is mandatory.
[3] Online Power Calculator
The PCI Express x16 slot provides a maximum of 75 Watts to the graphics card, plus 75 Watts and 150 Watts from the 6-pin and 8-pin connector of the power supply - so the power consumption of the graphics card must not exceed 300 watts. The processor may have a maximum TDP of 125 Watts. If powerful PC components are used, then check with the "Power Supply Calculator" whether the built-in 500 Watt power supply supports this configuration, see: http://global.shuttle.com/support/power. Please also refer to the support list for detailed processor and graphics cards support information at http://global.shuttle.com.