• Chassis
  Black aluminium chassis
  Front panel: brushed aluminium
  Front door for I/O ports (USB and Audio)
  Kensington Security Slot at the backpanel (also called K-Slot
  or Kensington lock) as a part of an anti-theft system
  Dimensions: 33.2 x 21,5 x 19.0 cm (LWH without feet) = 13.6 litre
  Height with rubber feet: 19.7 cm
  Weight: 3.9 kg net / 5.0 kg gross
• Mainboard / Chipset
  Mainboard with Shuttle form factor 195 x 244 mm, 
  proprietary design for XPC SB860R8
  Chipset/Southbridge: Intel® B860
  Passive chipset cooling with heat sink
  The Northbridge is integrated in the processor.
  Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
• BIOS
  AMI BIOS, SPI Interface, 32 MB Flash-EEPROM
  Supports Hardware Monitoring, Watch Dog
  Supports Power Fail Resume
  Supports boot up from external USB flash memory
  Supports Unified Extensible Firmware Interface (UEFI)
  Supports Firmware-TPM (fTPM) v2.0 [4]
• Power supply
  Built-in 500 Watt Flex-ATX switching power supply [3]
  AC input voltage: 100~240V, 50~60 Hz
  80 PLUS Gold compliant
  Active PFC circuit (Power Factor Correction)
  ATX main power connectors: 2x 10-pin and 2x 4-pin
  Graphics power connector: 6-pin and 8-pin (6+2)
  Other connectors: 4x SATA, 2x Molex
• Operating System
  This system comes without operating system.
  It is compatible with Windows 11 (64-bit) and Linux (64-bit)
• Processor support
  Processor Socket LGA1851
  Supports Intel Core Ultra 200 series 9/7/5 processors
  Code name "Arrow Lake-S"
  Maximum supported processor power consumption (Base TDP) = 125 W
  Does not support the unlock-function of Intel K-Series processors.
  Up to 24 cores (8 Performance-cores and 16 Efficient-cores)
  Neural Processing Unit (NPU) with 13 TOPS AI-Performance
  Note: processors with "F" identifier do not support integrated graphics [2]
  Please refer to the support list for detailed processor support information at global.shuttle.com.
• Heat-pipe processor cooling and fans
  Shuttle I.C.E. (Integrated Cooling Engine) with heat pipe cooling technology (10 heat pipes)
  Optimized airflow thanks to three large fans with 4-pin connectors:
  1) Front (blows air into the case): 80 x 80 x 15 mm
  2) Rear (blows air out of the case): 92 x 92 x 25 mm
  3) Heat pipe (CPU fan blows toward CPU voltage regulator): 92 x 92 x 25 mm
• Memory support
  4x 288-pin slot (UDIMM = Unbuffered DIMM)
  Supports DDR5-5600 (PC5-44800) SDRAM at 1.1 V
  Supports Dual Channel mode
  Supports a maximum of 48 GB per DIMM,
  maximum total size: 192 GB
  Note: Supports up to four unbuffered DIMM modules (no ECC or registered)
• Integrated Graphics (optional [2])
  The features of the integrated Intel graphics function with Xe cores
  depend on the processor type used.
  Note: Certain processor models do not support integrated graphics [2]
  The PC features these graphics outputs:
  - 1x HDMI 2.1 supports 8K UHD with max. 7680x4320 Pixel at 60 Hz (4320p60)
  - 1x HDMI 2.0b supports 4K UHD with max. 4096x2160 Pixel at 60 Hz (2160p60)
  - 2x DisplayPort supports 4K UHD with max. 4096x2160 Pixel at 60 Hz (2160p60)
  Supports up to four independent displays with the integrated graphics function
  If an 8K display is used, only two additional 4K displays are supported.
  Supports more displays in combination with a discrete graphics card.
  DisplayPort and HDMI support multi-channel digital audio over the display cable.
• PCIe Expansion Slots
  1x PCI-Express x16 Gen 5 slot
  1x PCI-Express x4 Gen 4 slot, open-ended
  Supports dual-slot (double-width) graphics cards (occupies the second PCI-Express slot)
  The maximum size acceptable for display cards is 280 x 120 x 40 mm.
  Graphics power connector: 6-pin and 8-pin (6+2) [3]
  Please refer to the support list for detailed support information at global.shuttle.com.
• Drive bays
  Storage bays: 4x 3.5" (internal)
  Using the optional accessory PHD3 two 2.5" drives
  can be installed into one 3.5" bay.
• SATA connectors
  4x Serial ATA 6G connector onboard (rev. 3.0, max. 6 Gbit/s)
  Supports Intel Rapid Storage Technology (RST) with RAID 0/1/5/10, JBOD)
• Two M.2-2280M SSD slots
  Provides two internal M.2 2280 M slots for M.2 SSD cards.
  Supports SSD cards with a width of 22 mm and PCIe interface (not SATA).
  Slot 1:
  - interface: PCIe Gen. 5.0 X4 with NVMe
  - supported length: 80 mm (type 2280)
  - location: next to the graphics card slot
  Slot 2:
  - interface: PCIe Gen. 4.0 X4 with NVMe
  - supported length: 42, 60 or 80 mm (type 2242, 2260, 2280)
  - location: next to the SATA connectors
• M.2-2230E slot for WLAN cards
  Interfaces: PCI-Express Gen. 4 X1 und USB 2.0
  Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
  Supports WLAN extension cards (optional Shuttle accessory: WLN-M1)
• HD Audio
  Audio Codec: Realtek ALC888, 5.1 channel
  Three analog audio connectors (3.5 mm) on the backpanel:
  Line-in (blue), line-out (green) and microphone input (pink)
  shared with 5.1 channel line-out (front, rear, center/bass)
  Front panel: microphone input and head phone output (line-out)
  DisplayPort and HDMI support multi-channel digital audio over the display cable.
• Two 2.5G Network Ports
  Two RJ45 connectors with 2 status LEDs each
  Intel i226-LM Ethernet Controller supports 100/1000/2500 Mbit/s data transfer rate
  Supports WAKE ON LAN (WOL) from S3/S4/S5 mode
  Supports network boot by Preboot eXecution Environment (PXE)
• Front Panel connectors and buttons
  Microphone input (3.5 mm)
  Headphones output (3.5 mm)
  1x USB 3.2 Gen 1 (5 Gbps), Type C
  1x USB 3.2 Gen 1 (5 Gbps), Type A, blue
  1x USB 2.0, Type A, black
  Power button
  Power indicator (Blue LED)
  Hard disk drive indicator (Yellow LED)
• Back Panel connectors
  1x HDMI 2.1 (left side, supports 8K/60Hz)
  1x HDMI 2.0b (right side)
  2x DisplayPort 1.4 [1]
  4x USB 3.2 Gen 2 (10 Gbps), Type A, red
  4x USB 2.0 (Type A, black)
  2x 2.5G LAN (RJ45)
  3x Audio Ports (3.5 mm): Line-output, Line-input, Microphone-input
  1x 4-pin connector (2.54 mm pitch) supports:
  - external power on button
  - Clear CMOS function
  - +5V DC voltage for external components
  1x perforation for optional serial RS232 port (COM Accessory: "H-RS232")
  3x perforation for optional WLAN antennas (WLAN Accessory: "WLN-M1")
• Other onboard connectors
  Occupied front panel connectors for USB, audio, buttons, LEDs
  1x RS232 serial interface (2x5 pin header, 2.0 mm pitch)
  3x fan connectors (4-pin header, all occupied)
  1x USB 2.0 (5-pin header, 2.54 mm pitch)
• Included Accessories
  Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
  Windows 64-bit driver disk
  4x Serial ATA cables
  16x Screws 6-32 UNC for four 3.5" hard disks and 2x cable ties
  4x Screws M3x4 (black) for one 2.5" SSD
  3x Screws M3x5 (silver) for M.2 card
  AC Power Cord (with protective-earth contacts)
  Heatsink Compound
  Protector cap for the CPU socket (do not use if heatpipe cooling system is mounted)
  Tool: Phillips screwdriver
• Optional Accessories
  H-RS232: Back panel adapter for serial RS232 port
  WLN-M1: WLAN kit supports WLAN and Bluetooth with two external antennas
  PHD3: Adapter for 2.5" drives such as SSDs
  CXP01: Adapter cable for external power button
• Environmental criteria
  Permissible ambient temperature during operation: 0~40 °C
  Relative humidity: 10~90 % (non-condensing)
• Certifications / Compliance:
  EMI: FCC, CE, BSMI, C-Tick
  Safety: ETL, CB, BSMI
  Other: RoHS, Energy Star 5.0, ErP
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
  (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP).

[1] How to convert DisplayPort to HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[2] Integrated graphics is optional
Processors with model numbers ending with "F" (z.B. Intel Core Ultra 7 265F) do not support integrated graphics, so that the graphics outputs of the Shuttle XPC have no function. In this case, an additional discrete PCIe graphics card is mandatory.
[3] Online Power Calculator
The PCI Express x16 slot provides a maximum of 75 Watts to the graphics card, plus 75 Watts and 150 Watts from the 6-pin and 8-pin connector of the power supply - so the power consumption of the graphics card must not exceed 300 watts. The processor may have a maximum TDP of 125 Watts. If powerful PC components are used, then check with the "Power Supply Calculator" whether the built-in 500 Watt power supply supports this configuration, see: http://global.shuttle.com/support/power. Please also refer to the support list for detailed processor and graphics cards support information at http://global.shuttle.com.
[4] TPM Function
This product features Firmware-TPM (fTPM) v2.0. Besides this, it is prepared for a hardware TPM chip which can be fitted by factory on request if required.