- Fanless and silent
Passive heatpipe cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must be kept clear.
- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer. - IP54 protected
The front panel is dust-protected and protected from
splashing of water according to protection class IP54. - Chassis
Colour: black or white
Dimensions: 391 x 327 x 42 mm (W x H x D)
100mm VESA mount capable
Mounting hole for Kensington lock
Weight: 3.26 kg net, 4.5 kg gross - Operating system
This system comes without operating system.
It is compatible with:
- Windows 11 - 64-bit
- Linux - 64-bit - Touchscreen
Touchscreen function supports fingertip input
Resistive 5-wire single-touch technology
Stylus for the built-in touchscreen - 39.6cm display (15.6")
39.6 cm / 15.6" LC-display, ratio: 16:9 wide-screen panel
Resolution: 1366 x 768 = 1.05 Megapixel
Backlight unit: High power LED, Luminance: 220 cd/sqm
Glass thickness: 3.2 mm - Processor
Model: Intel® Processor N150
Max. Turbo clock frequency: 3.6 GHz
Code name: "Twin Lake" (Alder Lake-N series)
Intel 7 (10 nm) process, BGA1264 package (soldered)
CPU cores / Threads: 4 / 4
L2 Cache: 6 MB
Thermal Design Power (TDP): 6 W
System-on-Chip processor (SoC) with integrated graphics processor, no chipset required
Passive processor cooling without fan - Integrated Graphics
Intel® Graphics
GPU clock frequency: max. 1000 MHz
Execution Units (EUs): 24
Supports DirectX 12.1, OpenGL 4.6, OpenCL 3.0 - Up to three displays simultaneously
Two video ports support two additional independent screens:
1) HDMI 2.0b digital audio/video port supports up to 3840 x 2160 pixels resolution at 60 Hz refresh rate (2160p60)
2) VGA / D-Sub analog video port supports 1920 x 1080 pixels resolution at 60 Hz refresh rate (1080p60)
Special conditions for operation in Multi-Monitor mode:
1) Clone mode: all displays show the same content at 1366x768 resolution
2) Extended mode: all displays show different content - BIOS
AMI BIOS in 32 MByte EEPROM with SPI interface
Supports Power fail resume / always on
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports hardware monitoring and Watchdog functionality
Supports Firmware TPM v2.0 functionality - Memory
1x SO-DIMM slot with 262 pins
Supports DDR5-4800 (PC5-38400) SDRAM at 1.1 V
Supports a maximum capacity of 16 GB
Supports DDR5 memory modules with higher frequency rating
Supports two unbuffered DIMM modules (no ECC or registered) - Hard disk drive / SSD
Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
Supports one drive with up to 9.5 mm in height
SATA data/power cable pre-installed - M.2 expansion slot for SSD card
M.2-2280 M-key slot
Interfaces: PCI-Express Gen. 3.0 x2 and SATA
Supports M.2 SSD cards with a width of 22 mm and a length of 80 mm (type 2280)
Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key) - Webcam
Integrated Full HD webcam (1920 x 1080 pixels)
USB interface - Microphone and speakers
Front panel with integrated Electret Condenser Microphone and
2x 2 W speakers - Integrated Audio
Realtek ALC888S (HD-Audio)
Two analog audio connectors (3.5 mm) on the bottom side:
1) Line-out (head-phones)
2) Microphone input
Digital Audio is supported via the HDMI output. - Wired Network
Intel i226LM Ethernet Controller
Supports 100 / 1.000 / 2.500 MBit/s operation
Supports WAKE ON LAN (WOL) from S3, S4 modes
Supports network boot by Preboot eXecution Environment (PXE) - Wireless Network (WLAN)
WLAN controller Card: Realtek RTL8821CE
WLAN antennas: two internal antennas
Supports WiFi IEEE 802.11b/g/n/ac on the 2.4 / 5 GHz band, 1T1R
Supports 20 / 40 / 80 MHz channel bandwidth
Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
Supports Bluetooth 4.2 on the 2.4 GHz band
The M.2-2230 Key A+E slot supports PCIe Gen3 x1, USB 2.0 und CNVi - Front LEDs
Power LED (blue)
HDD/SSD LED (orange) - Connectors left side
Power button
2x USB 3.2 Gen 2 (max. 10 Gbps, red)
Hole with hidden power button (onboard micro switch)
Hole with hidden Clear CMOS button (onboard micro switch) - Connectors bottom side
HDMI 2.0b (supports digital video and digital audio)
VGA connector (D-Sub 15 pol., analog video)
4x USB 3.2 Gen 1 (max. 5 Gbps, blue)
Gigabit Network (2.5G LAN, RJ45, Intel i226LM)
Audio Line-out / head-phones (3.5 mm jack)
Microphone input (3.5 mm jack)
DC input for external power adapter (5.5 / 2.5 mm)
Optional: 2x COM/serial RS232 D-Sub - Connectors onboard
Internal USB 2.0 type A connector for a USB stick
Serial ATA (6 Gbps) data/power connector
2x serial interfaces for optional COM ports (each 2x5-pin, 2 mm pitch)
Other available connectors are occupied by integrated components. - Opening holes for four optional antennas
The chassis features four perforated 6.5 mm holes
for optional antennas mounted with an (RP-)SMA connector
for wireless network such as WLAN or WWAN (e.g. 4G/5G)
(see section "Optional Accessories") - Power adapter
External 65 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz, max. 1.5 A, C6 connector
Automatic AC voltage adjust
DC Output: 19 V, max. 3.42 A, max. 65 W
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
DC cable length: ca. 170 cm
AC cable length: ca. 170 cm
AC cable with 3-pin Micky MM C5 and Schuko earthed safety plug - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% or 19V±5%. - Included Accessories:
Multilingual Quick Guide
Driver DVD for Windows 11
External Power Adapter (65W / 19V)
AC Power cord with protective-earth contacts
M3x4 silver screw for mounting one M.2 SSD card
4x M3x4 black screws for mounting a 2.5" SATA drive
Thermal pad 70 x 20 x 5.25 mm for cooling an M.2 SSD card - Optional Accessories:
1) WLAN Kit WLN-M12 (Intel AX210 card + two external antennas)
An 802.11ac (1T1R) WLAN function with internal antennas is already pre-installed and can be upgraded to 802.11ax (2T2R) with two external antennas with this kit.
2) COM port adapter 2x PCP11
provides two serial RS232 COM ports on the bottom side
3) Robust VESA Stand POV21:
supports one or two AIO-PCs/Displays
with 75x75 or 100x100 mm VESA
(max. 21.5" display size and 20 kg total weight). - Environmental criteria
Operating temperature: 0~40 °C
Humidity: 10~90 %, non-condensing - Certification and Compliance
EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
Safety: CB (IEC 60950/62368), cTUVus (UL 62368), BSMI
Other compliances: RoHS, ErP Lot3, Energy Star v8.0 - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to eco design requirements for energy-related products (ErP),
(4) 2014/53/EU Radio Equipment Directive (RED)