Shuttle

WWN11

Expansion kit with 4G modem module and two antennas

With this accessory kit, you can equip a compatible Shuttle XPC with a built-in 4G network function. This kit includes a 4G modem module, an M.2 adapter card and two antennas with cables. All you need is an activated Nano SIM card. Please note that when used with DL10J, the M.2-2230 slot is used for this purpose and any existing WLAN cards must first be removed from the PC.

  • Contents:
    - 4G modem-module
    - M.2 adapter card (LN004)
    - Fastening screw for 4G modem module (two-parts)
    - 2× external LTE/4G antennas
    - 2× antenna cables with toothed lock washer and screw nut
    - Quick installation guide
  • 4G modem module
    Model: Huawei ME906s-158 (for Europe)
    Form factor: 30 × 42 × 2.3 mm (HWD), 75-pin M.2/NGFF
    LTE data transfer rate: max. 150/50 Mbps @ 20MHz Bandwidth Cat4
    Further information at www.huawei.com
  • M.2 adapter card:
    Riser card for the M.2-2230 Key E slot
    Dimensions: 30 × 30 mm
    - supports one 4G module M.2-3042 Key B
    - supports one SIM card in Nano format
  • Two external antennas:
    LTE/4G dipole omnidirectional antenna
    Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
    Colour: black
    Length overall: 135.7 mm
    Dimensions of the antenna body: 114.8 mm × 20.1 mm
    Impedance: 50 Ohm
    Voltage Standing Wave Ratio (VSWR): <= 3.0
    Radiation: Omni
    Gain: 2 dBi
    Polarisation: vertical
    Connector: SMA
  • Two antenna cables:
    RF cable lengths: 20 cm
    Connectors:
    1) SMA Pigtail female
    2) I-PEX MHF 4
  • Compatibility:
    The WWN11 accessory kit can be used for
    - Shuttle XPC slim DL10J
    - Shuttle Edge EN01J3, EN01J4, EN01E (adapter card is not required)
    Supported operation system: Windows 10
    Note that you also need a SIM card in Nano format