Slim X-type chassis, colour: black
Dimensions: 250 x 200 x 78.5 mm (LWH)
Weight: 1.9 kg net, 3.0 kg gross
Open front - no concealed front panel connectors
Hole for Kensington Lock at the backpanel
- Operation Position
(1) horizontal on its feet
(2) vertical with the optional stand (Accessory PS01)
(3) vertical with the supplied VESA mount bracket
- Power Adapter
External 180 W power adapter (fanless)
Input: 100~240 V AC, 50~60 Hz, max. 2.5 A
Output: 19.5 V DC, max. 9.23 A, max. 180 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7 m
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
Dimensions: ca. 167 x 82 x 25.5 mm = 350 ml
- Operating System
This system comes without an operating system.
It is compatible with Windows 10/11 and Linux (64-bit)
- Processor support
Processor Socket LGA1200
Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
Supports 10th generation Intel Core processors, codenamed "Comet Lake-S" in 14 nm process technology
Maximum supported processor power consumption (TDP) = 65 W
Up to 10 CPU cores, 20 threads and 20 MB of L3 cache
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, RAM controller and the graphics engine
(Performance features depend on processor type )
Please refer to the support list for detailed processor support information at global.shuttle.com.
Not compatible with older Socket LGA 1151(v2) processors.
- Processor Heatpipe Cooling
Processor cooling with heatpipe technology and two fans (60 mm)
- Mainboard / Chipset
Mainboard in a Shuttle form factor proprietary design for the XPC XH410G
Chipset/Southbridge: Intel® H410
Passive chipset cooling with heat sink
The Northbridge is integrated in the processor.
Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
AMI BIOS, SPI Interface, 16 MB Flash-EEPROM
Supports Hardware Monitoring and Watchdog functionality
Supports Firmware-TPM (fTPM) v2.0 
Supports boot up from external USB flash memory
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
- Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2666/2933 (PC4-21300/23466) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
Note: The memory clock speed depends on the processor model. Intel Core i9 and i7 series processors support DDR4-2933 memory speed, while the other models support DDR4-2666.
- Integrated Graphics
The features of the integrated Intel UHD graphics function
depend on the processor type used. 
Supports DirectX 12, OpenGL 4.5
The PC features two video outputs:
- 1x HDMI v2.0a (digital) supports 1080p/60 and 2160p/60
- 1x D-Sub VGA (analog) supports 1080p/60
The HDMI output supports displays with 4K Ultra HD resolution at 3840 x 2160 with 60 Hz refresh rate and support multi-channel digital audio over the same cable.
Supports two independent displays with the integrated graphics function
Supports Blu-ray (BD) playback with HDCP content protection 
Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)
- PCIe Expansion Slot
1x PCI-Express X16 v3.0 slot with installed 90° Riser Card
The used expansion card must meet the following conditions:
- Maximum dimensions: 208 mm x 120 mm x 30 mm (Single Slot)
- Maximum power consumption: 75 W
- 5V (max. 2 A) auxiliary voltage via 4-pin Molex connector
- Audio Function
Audio Realtek® ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
(1) Microphone input
(2) Headphones output (Line out)
Digital 7.1 audio output: possible via the HDMI port
- Gigabit LAN Controller
Intel i219LM network controller
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
- 2.5" Storage Bay
This system features one 2.5" drive bay which is accessible
from the bottom of the housing.
It supports one 2.5" / 6.35 cm hard disk or SSD with max. 9.5 mm height.
The system includes a pre-installed data/power cable .
The connector supports SATA III with max. 6 Gbps.
- M.2-2280 M Slot
The M.2-2280 M slot provides the following interfaces:
- PCI-Express v2.0 X4
- SATA v3.0 (6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280) and
M.2 SSDs with SATA or PCIe interface.
- M.2-2230 AE Slot
The M.2 2230 AE slot has the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and other. A SATA interface for SSD cards is not available here.
- Internal USB Port
This system features one internal USB port
which is located behind the bottom cover of this PC.
Connector: USB 2.0 Type A
Maximum permitted size of the USB stick: 11.5 mm x 28 mm x 88 mm
- Front Panel connectors
1x Microphone input (3.5 mm)
1x Headphones output (3.5 mm, line out)
2x USB 3.2 Gen 1
2x USB 2.0
1x Power button with Power LED (blue)
1x HDD LED (yellow)
- Back Panel connectors
1x HDMI 2.0a digital audio/video output, supports screw lock 
1x VGA / D-Sub analog video output
2x USB 3.2 Gen 1
2x USB 2.0
1x GigaBit LAN (RJ45, Intel i219LM)
1x DC-input connector for external power adapter (supports 19.5 V)
1x 4-pin connector (2.54 mm pitch) supports:
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
2x perforation for optional Wireless LAN antennas
1x hole for Kensington Lock
- Other onboard connectors
2-pin onboard ATX connector with 5V (max. 2 A) output voltage with 4-pin Molex adapter cable
Power-on-after-power-fail (hardware solution by jumper) 
RS232 COM port (2x5-pin header, 2 mm pitch)
Front connector for power button, LEDs, USBs, audio ports
4-pin fan connectors (occupied by the CPU cooling system)
4-pin USB 2.0 connector (occupied by the internal USB port)
2x 5-pin debug port
- Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
Bracket for one 2.5" drive with screws
External power adapter with 1.7 m power cord with earthing contact
VESA mount bracket (metal) supports 75x75 and 100x100 mm standard with four screws M4x10
Internal adapter cable with 4-pin Molex connector for 5V/2A auxiliary voltage
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system with heatsink compound
- Optional Accessory
- PS01: Vertical stand
- WLN-M: WLAN module 802.11ac + BT4.0 with two external antennas 
- PCP11: Backpanel COM port adapter for RS232 serial interface
- CXP01: Adapter cable for external power button
- Environmental Specifications
Operating temperature range: 0~50 °C 
Relative humidity range: 10~90 % (non-condensing)
- Conformity and Certifications
EMI: CE, FCC, RCM, VCCI
Safety: CB, ETL, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 Power on after power fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indi-cates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the XH410G also comes with a hardware-based solution. By removing Jumper JP1 (located in a corner of the mainboard near the DIMM sockets) the system will start unconditionally once power is supplied.
 High ambient temperature
For high ambient temperature over 40 °C we strongly recommend to use SSDs instead of hard disk drives.
 Power connector for SATA drives
The supplied power cable for a SATA drive provides a voltage of 5 V. In very rare cases a 2.5" hard disk also requires a 12 V line. This is not support-ed.
 HDMI output supports DVI-D with optional adapter
 For Blu-ray playback appropriate software and an external Blu-ray drive is required (not included).
 Optional Wireless LAN module
Shuttle offers the optional accessory "WLN-M" which adds WLAN IEEE 802.11ac and Bluetooth 4.0 functionality. This kit consists of an M.2-2230 expansion card and two external antennas with appropriate cables.
 Intel processors without integrated graphics can be identified by their model name ending on "F", e.g. Core i7-10700F. When using this CPU, a graphics card is required.
 TPM Function
This product features Firmware-TPM (fTPM) v2.0. Besides, it is prepared for a hardware TPM chip which can be fitted by factory on request.