Slim 3.5-litre chassis, colour: black
Dimensions: 242 x 200 x 72.5 mm (LWH without rubber feet) = 3.5-litre
Height including rubber feet: 73.2 mm
Weight: 2.2 kg net, 3.5 kg gross
Covers for optical drive and front panel connectors
Hole for Kensington Lock at the backpanel
Operation position horizontal or even vertical with the optional stand PS01
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, max. 4.74 A, max. 90 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7m
DC Connector: 5.5 / 2.5mm (outer/inner diameter)
Remark: the DC-input of the computer supports an external power source with either 12V±5% or 19V±5%. Beside the DC-input at the backpanel, the mainboard also features an onboard connector for the power supply (4-pin P4 ATX 12V female).
- Operating System
This system comes without operating system.
It is compatible with Windows 10/11 and Linux (64-bit)
- Processor support
Processor Socket LGA 1151v2
Supports Intel Core i9 / i7 / i5 / i3, Pentium and Celeron processors
Supports the 8th and 9th generation Intel Core processors, codename "Coffee Lake (Refresh)" in 14++ nm process technology 
Supports processors with integrated graphics only 
Maximum supported processor power consumption (TDP) = 65 W
Up to 8 CPU cores, 16 threads and 16 MB of L3 cache
Does not support the unlock-function of Intel K-Series processors.
Not compatible with older Socket LGA 1151 processors (6th Gen. "Skylake" and 7th Gen. "Kaby Lake").
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die
(performance features depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
- Processor heat-pipe cooling
Processor cooling with heat-pipe technology and two fans (6cm)
- Mainboard / Chipset / BIOS
Mainboard XH310V2 , Mini-ITX form factor 17 x 17 cm, 8 layer design
Chipset: Intel® H310 Chipset
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and Watchdog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
Supports Firmware TPM v2.0 (fTPM)
- Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2400/2666 (PC4-19200/21300) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
- Integrated Graphics
The features of the integrated Intel UHD graphics function
depend on the processor type used.
Supports DirectX 12, OpenGL 4.5
The PC features three video outputs:
- 1x HDMI v2.0a (supports 1080p/60 and 2160p/60)
- 1x DisplayPort v1.2 (supports 1080p/60 and 2160p/60)
- 1x Analog VGA (15-pin D-Sub)
Supports two independent displays simultaneously with the integrated graphics function.
Supports Blu-ray (BD) playback with HDCP content protection 
Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)
- 5.1-channel audio
Audio Realtek® ALC 662 5.1-channel High-Definition Audio
Three analog audio connectors (3.5mm) at the backpanel:
1) Front line-out (head-phones)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with line-in)
Digital multi-channel audio output: by HDMI and DisplayPort
- Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
2x Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode 
- M.2-2280M SSD slot
The M.2 2280M slot provides the following interfaces:
- PCI-Express Gen. 2.0 X4, supports NVMe
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
- M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN extension cards (optional Shuttle accessory: WLN-M)
- Drive connectors
3x Serial-ATA connector, max. 6 Gbps
Supports NCQ and AHCI
Note: The package includes pre-installed cables (for SATA and power) and mounting screws for one 2.5" drive and one optical slimline drive.
- Storage Bays
This system features three drive bays:
1) supports one optical drive (ODD) in 5.25" slimline format with 12.7 mm height - this bay can alternatively be used for a 2.5" drive
2) upper 2.5" bay supports one 2.5" drive with max. 12.5 mm height
3) lower 2.5" bay supports one 2.5" drive with max. 9.5 mm height
The system includes the following pre-installed cables:
- 2x Power cable for 2.5" drives (5 Volt )
- 1x SATA cable for one 2.5" drive
- 1x combo connector (SATA and power) for an optical slimline drive (DVD or Blu-ray)
Note: This system is ready for one 2.5" drive (SSD or hard disk) and one DVD/Blu-ray drive in slimline format to be installed.
For further 2.5" drives, additional SATA cables and screws are required. For a possible third 2.5" drive also a Y power cable is required. (All not included)
The optional accessory PHD4 allows the installation of a 3.5" hard disk .
- Front Panel connectors
Audio Line-out (headphones)
2x USB 3.0 (= USB 3.2 Gen 1)
2x USB 2.0
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
1x DisplayPort 1.2 audio/video output 
1x HDMI 2.0a audio/video output
1x Analog VGA video output (15-pin D-Sub)
Note: a maximum of two displays can be operated at the same time.
2x USB 3.0 (= USB 3.2 Gen 1)
2x USB 2.0
2x GigaBit LAN (RJ45)
1x COM (RS232) - on the right side
1x COM (RS232/422/485) - middle/down
3x Audio 3.5mm (Line-in, Line-out, Mic-in)
1x DC-input connector for external power adapter (supports 12V±5% or 19V±5%)
1x 4-pin connector (2.54 mm pitch) supports:
- external power on button (see optional accessory CXP01)
- Clear CMOS function
- +5V DC voltage for external components
2x Perforation for Wireless LAN antennas
1x Hole for Kensington Lock
- Other onboard connectors
Jumper for power-on-after-power-fail (hardware solution) 
Front connectors for power button, LEDs, USBs, audio ports
USB 2.0 headers (4-pin)
4x RS232 COM port (2x5-pin header, 2 mm pitch) - 1x occupied
Two 4-pin fan connectors (one occupied by the CPU cooling system)
LPC interface (2x5-pin header, 2 mm pitch)
Embedded DisplayPort (eDP, 2x 15-pin)
Power input connector (4-pin P4 ATX 12V female)
- Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
DVD with Windows driver software and manuals in PDF format
Pre-installed SATA and power cables for one 2.5" drive and one slimline drive
External power adapter with 1.7m AC power cord (with protective-earth contacts)
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system with heatsink compound
2 screws for installation of two M.2 cards
8 screws for installation of two 2.5" drives
2 screws for installation of an optional slimline drive
- Optional Accessory
- PS01: Vertical stand
- PV02: VESA mount
- WLN-M: WLAN module 
- PHD4: 3.5" Hard Disk Rack 
- CXP01: adapter cable for external power button
- MY01: Cover for slimline drive bay 
- Environmental Specifications
Operating temperature range: 0~50°C 
Relative humidity range: 10~90% (non-condensing)
- Conformity and Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing the appropriate jumper JP4, the system will start unconditionally once power is supplied.
 How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 For Blu-ray playback appropriate software and a Blu-ray drive is required (not included).
 Optional Wireless LAN module:
This Slim PC supports an optional WLAN module which consists of an M.2 expansion card with IEEE 802.11ac, Bluetooth 4.0 functionality and two external antennas with appropriate cables. Shuttle offers its suitable accessory kit "WLN-M".
 Teaming Mode
The teaming function allows for grouping both available network adapters to work as one single adapter. The benefit of this approach is that it enables load balancing and failover.
Driver download: https://downloadcenter.intel.com/download/21642
 Power connector for SATA drives
The supplied power cables for SATA drives provide a voltage of 5V. Only in very exceptional cases a 2.5" hard disk also requires a 12V line, which is not supported out-of-the-box (only via an optional adapter, included by PHD4).
 High ambient temperature
For high ambient temperature over 40°C we strongly recommend to use SSDs instead of hard disk drives.
 The optional accessory PHD4 allows for installation of one 3.5" hard drive. However doing so means no other drives such as a slimline DVD drive or a 2.5" HDD/SSD can be used.
 Optional accessory MY01: Drive bay cover
If this PC is used without an optical slimline drive, this cover helps close the open bay which can be particularly important in public institutions and prevent from dust and objects being inserted inappropriately. Please contact Shuttle for the optional accessory "Mylar POI-MY01".
 Important notes regarding 9th generation processors
The 9th generation of Intel Core desktop processors (9000 series with code name "Coffee Lake Refresh") are supported since BIOS version XH310200.105 (date 2019-04-22). Download area: global.shuttle.com
Please don't use processors with model numbers ending with "F" (e.g. Intel Core i5-9400F) which do not support integrated graphics.