Slim PC with black chassis made of metal
Dimensions: 190 × 165 × 43 mm (LWH) = 1.35-litre
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) on both sides of the chassis
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5 mm (outer/inner diameter)
Remark: The DC-input of the computer supports an external power source with either 12V±5% or 19V±5%.
AC mains cable: 3 pins, ca. 1.7 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
- Operating System
This system comes without operating system.
It is compatible with Windows 10 and Linux (64-bit)
- Processor support
Processor Socket LGA 1200
Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
Supports 10th generation Intel Core processors, codenamed "Comet Lake-S" in 14 nm process technology
Supports processors with integrated graphics only 
Maximum supported processor power consumption (TDP) = 65 W
Up to 10 CPU cores, 20 threads and 20 MB of L3 cache
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die
(performance features depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
Not compatible with older Socket LGA 1151(v2) processors.
- Processor cooling
Heat-pipe processor cooling with two 60 mm fans on the upper side of the chassis
- Mainboard / Chipset
Mainboard in the Shuttle form factor proprietary design for the XPC DH410
Chipset/Southbridge: Intel® H410
Passive chipset cooling with heat sink
The Northbridge is integrated into the processor.
Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
AMI BIOS, SPI Interface, 16 MB Flash-EEPROM
Supports Hardware Monitoring and watchdog functionality
Supports Firmware-TPM (fTPM) v2.0 
Supports boot up from external USB flash memory
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
- Memory support
2× SO-DIMM slot with 260 pins
Supports DDR4-2666/2933 (PC4-21300/23466) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
Note: The memory clock speed depends on the processor model. Intel Core i9 and i7 series processors support DDR4-2933 memory speed, while the other models support DDR4-2666. Regardless of that, memory modules with higher speed ratings such as DDR4-3200 can also be used.
- Integrated Graphics
The features of the integrated Intel UHD graphics function
depend on the processor type used.
Supports DirectX 12, OpenGL 4.5
The PC features two video outputs which support 1080p/60 and 2160p/60:
- 1× HDMI v2.0a
- 1× DisplayPort v1.2
Supports displays with 4K Ultra HD resolution at 3840 × 2160
Supports two independent displays with the integrated graphics function
Supports Blu-ray (BD) playback with HDCP content protection 
Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)
DisplayPort and HDMI support multi-channel digital audio over the same cable.
Optional analog D-Sub/VGA video output 
- Storage bay
1× 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive with SATA connector
Device height: 12.5 mm (max.)
- SATA connectors
1× Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
With Serial-ATA power connector (onboard)
- M.2-2280M SSD slot
The M.2 2280M slot provides the following interfaces:
- PCI-Express Gen. 2.0 X4, supports NVMe
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface
- M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN extension cards (optional Shuttle accessory: WLN-M)
Audio Realtek® ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5mm) on the front panel:
1) 2-channel line-out (head-phones)
2) microphone input
Digital multi-channel audio output: by HDMI and DisplayPort
- Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
2× Intel i210-AT Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode 
- Card Reader
Integrated card reader
Supports SD, SDHC and SDXC up to v3.01 memory cards
UHS-I interface supports up to 104 MB/s (SDR104) transfer speed
Realtek RTS5227S chip with PCIe chipset interface
Supports boot up from SD card.
- Front Panel connectors
Audio Line-out (headphones)
2× USB 3.2 Gen 1
2× USB 2.0
SD card reader
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
1× HDMI 2.0a connector 
1× DisplayPort 1.2 connector (DP) 
Optional: 1× D-Sub VGA connector (Accessory PVG01 )
2× USB 3.2 Gen 1
2× USB 2.0
2× Gigabit LAN (RJ45)
2× RS232 serial port, 9-pin D-Sub (5/12V, 1× RS422/RS485) 
1× DC-input connector for external power adapter (supports 12V±5% or 19V±5%)
1× 4-pin connector (2.54 mm pitch) supports:
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
2× Perforation for optional Wireless LAN antennas
2× hole for Kensington Locks
- Other onboard connectors
1× jumper for power-on-after-power-fail (hardware solution) 
1× analog VGA graphics output CN6 (2× 10-pin, 1 mm pitch) 
2× serial interface (COM) occupied by back panel connectors
1× USB 2.0 (4-pin) for optional accessory WWN03 (LTE kit)
1× fan connector (4-pin) occupied by the cooling system
1× connector for CMOS battery (occupied)
- Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75/100 mm standard (two metal brackets)
Four screws M3 × 5 mm (screws together VESA mount and PC)
Four screws M4 × 10 mm (to affix VESA mount on the PC)
Four screws M3 × 4 mm (to mount a 2.5" storage device into the bay)
Two screws M3 × 5 mm (silver colour, to mount two M.2 cards)
Driver DVD (Windows 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 90 W power adapter with power cord
Protection cap for CPU socket (do not use if heatpipe or fan is mounted)
- Optional Accessories
- PVG01: optional D-Sub VGA video output 
- WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas.
- WWN03: LTE adapter kit with antennas, but without LTE card
- PS02: Stand for vertical operation
- CXP01: adapter cable for an external power button
- PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs
- DIR01: DIN-Rail mounting kit
- Environmental Specifications
Operating temperature range: 0~50 °C 
Relative humidity, non-condensing: 10~90 %
- Certifications / Compliance::
EMI: FCC, CE, BSMI, RCM, VCCI
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as technical information equipment (ITE) in class B and is intended for use in the living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 HDMI output supports DVI-D with optional adapter Driver download: downloadmirror.intel.com/22283/eng/23_2.zip
 How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 Serial Ports
This PC features two serial RS232 ports with 9-pin D-Sub connectors at the backpanel. The left COM port (COM1) can also be configured as RS422 and RS485 in BIOS. The COM ports are protected by black plastic caps.
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The maximum current is 500 mA per connector.
 Optional D-Sub/VGA connector
The mainboard features one analog graphics port CN6 on the mainboard. This signal can be lead to the outside as a 15-pin D-Sub VGA connector on the back panel by using the optional adapter PVG01. However, doing so means one serial port (COM) less can be used on the backpanel.
 Teaming Mode
The teaming function allows you to group both available network adapters to function as a single adapter. The benefit of this approach is that it enables load balancing and failover.
 Operating temperature
For high ambient temperatures over 40 °C, we strongly recommend to use SSDs (supporting at least 70 °C) and rugged SO-DIMM memory modules with a temperature range of up to 95 °C.
 Power on after power fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DH410 also comes with a hardware-based solution. By removing Jumper JP2 (on the mainboard behind the power button) the system will start unconditionally once power is supplied.
 Optional Accessory WWN03 (LTE kit)
The Shuttle XPC accessory WWN03 allows this PC to be upgraded with an LTE/4G function for mobile network. The LTE card will occupy the 2.5" bay, so you have to use an M.2 SSD as a mass storage device. The required LTE/4G card in M.2-3042 format and an activated Nano SIM card is not included in the scope of delivery.
 For Blu-ray playback appropriate software and an external Blu-ray drive is required (not included).
 Intel processors without integrated graphics (ID ends with "F", e.g. Core i7-10700F) are not compatible.
 TPM Function
This product features Firmware-TPM (fTPM) v2.0. Besides this, it is prepared for a hardware TPM chip which can be fitted by the factory on special order if necessary.
Driver download: downloadmirror.intel.com/22283/eng/23_2.zip