• Fanless and silent
  Completely fanless, virtually noiseless
  Large aluminium heatsink
  Passive cooling through convective heat transfer
  Ideal for noise-sensitive environments
  Fanless means less dust inside the case and thus virtually no maintenance required.
• 24/7 Nonstop Operation
  This device is approved for 24/7 permanent operation.
• Chassis
  Rugged cassis made of aluminium
  Colour: purple
  Dimensions: 120 x 75 x 51 mm (WxDxH) , 460 ml
  (Height: ca. 53 mm including rubber feet)
  Weight: 730/1250 g net (without/with accessories) and 1.5 kg gross
• Operation Positions
  1) VESA-mounted behind an appropriate monitor (supports 100x100 mm VESA standard)
  2) Standing on its rubber feet like a desktop PC
• Operation System
  This system comes without operating system.
  It is compatible with:
  - Windows 10/11 (64-bit)
  - Linux (64-bit)
  Download Windows-10/11 drivers here: https://go.shuttle.eu/SPCEL12 
• Processor
  Intel® Celeron® Prozessor J6412, Quad Core
  CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.6 GHz
  Code name: "Elkhart Lake"
  10 nm process, FCBGA1493 package (soldered)
  CPU cores / Threads: 4 / 4
  L2 Cache: 1.5 MB
  Thermal Design Power (TDP): 10 W
  System-on-Chip processor (SoC) with integrated graphics processor, no additional chipset required
• Processor Cooling
  Fanless cooling system with passive heat sink, virtually noiseless
• Integrated Graphics
  The Graphics Processing Unit (GPU) is integrated in the processor.
  Intel® UHD Graphics (Intel Gen 10), graphics frequency: 400~800 MHz
  Execution Units (EU): 16, Shader: 128
  Max. Shared Memory (graphics memory): 8 GB
  Supports DirectX 12, Intel Quick Sync Video, Shared Memory
  Codec Support in Hardware: h265 (8-/10-bit), h264, VP8, VP9, AVC (only decoding: AV1, VC-1)
  The PC features three independent video outputs:
  - 2x HDMI v2.0b
  - 1x DisplayPort v1.4
  All ports support displays with 4K Ultra HD resolution at 3840 x 2160 with 60 Hz refresh rate and multi-channel digital audio over the same cable.
• UEFI Firmware
  16 MB Flash ROM with AMI UEFI BIOS Firmware
  Based on the Unified Extensible Firmware Interface (UEFI)
  Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
  Supports boot up from external flash memory cards (USB or SD card)
  Hardware TPM v2.0: Infineon SLB9670VQ2
• Memory Support
  1x SO-DIMM slots with 260 pins
  Supports DDR4-3200 (PC4-25600) SDRAM at 1.2V
  Supports one RAM module with max. 32 GB capacity
  Supports one unbuffered DIMM module (no ECC)
• M.2 expansion slot for SSD cards
  M.2-2242/2280 slot with SATA interface
  - supports SSD cards in M.2-2242 format (length: 42 mm)
  - only supports SSD cards in M.2-2280 format (length: 80 mm) if no WLAN or 4G card is installed
  - only upports SSD cards with SATA interface (not PCIe/NVMe)
• M.2 expansion slots for WLAN or 4G
  The Edge PC can be equipped with either a WLAN or 4G function. Two slots are available for this purpose, which are stacked one above the other:
  1) M.2-2230 E-Key slot for WLAN cards in 22 x 30 mm format (W x L)
  2) M.2-3042 B-Key slot for 4G cards in 30 x 42 mm format (W x L)
  Notes:
  1) For thermal reasons, only one slot may be populated at a time. There are also only two perforations (holes) for external antennas.
  2) The antenna cables should ideally be 10 cm long. Shuttle offer the optional WLAN accessory kit "WLN-M3" (including Wi-Fi 6 WLAN card and two antennas with cables)
  3) If a WLAN or 4G card is installed, the M.2 SSD card is limited to the M.2-2242 format with a length of 42 mm.
  4) If a 4G card is installed, this is used in combination with the nano SIM slot located on the back of the Edge PC.
  5) The M.2-2230 slot also supports an AI accelerator module for AI applications [1]
• Dual 2.5G LAN
  Dual network with two RJ45 ports with two status LEDs each
  Used network chips:
  2x Intel i226-V Ethernet Controller (PCIe)
  Supports 100 / 1.000 / 2.500 MBit/s operation
  Supports WAKE ON LAN (WOL)
  Supports network boot by Preboot eXecution Environment (PXE)
• Audio
  Audio Realtek® ALC888-VD High-Definition Audio
  Two analog audio connectors (3.5 mm) on the back panel:
  1) 2-channel line-out (head-phones)
  2) microphone input
  Digital multi-channel audio output: by HDMI and DisplayPort
• Front Panel Connectors
  - Power Button
  - Power LED
  - 2x HDMI 2.0b
  - 1x DisplayPort 1.4
  - 2x USB 3.2 Gen 2 Type A (max. 10 Gbps)
  - USB 2.0 Type A
  - 2.5G network port (LAN, RJ45)
  - DC input for 2.5/5.5 mm barrel plug supports 12-20 V voltage range
• Back Panel Connectors
  - 2.5G network port (LAN, RJ45)
  - Microphone input
  - Audio Line-out (headphones)
  - Micro SD card reader slot
  - Slot for Nano SIM card (if a 4G card and antennas have been installed)
  - 2x perforated 6.5 mm holes for optional WLAN or 4G antennas
• DC Input
  The DC input supports standard power adapters with 5.5 / 2.5 mm barrel plugs (outer / inner diameter) and supports a wide voltage range from 12 to 20 V. Required output wattage of the power source: ≥65 W.
• Power Adapter
  External 65 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, 3.42 A, max. 65 W
  DC Connector: 5.5/2.5 mm (outer/inner diameter)
  AC mains cable: 3 pins, ca. 1.7 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
• Supplied Accessories
  - Multi-language user guide (EN, DE, FR, ES, JP, RU, SC, TC)
  - VESA Mount supports 100 x 100 mm standard
  - Three black screws M3 x 6 mm for the VESA mount
  - Two thermal pads for a single-side or double-side RAM module
  Note: additional thermal pads are already installed
  - External 65 W power adapter with power cord
  Note: a Driver-DVD is not included in the scope of delivery.
  Download Windows-10/11 drivers here: https://go.shuttle.eu/SPCEL12 
• Optional Shuttle Accessories
  1) WLN-M3: WLAN kit including Wi-Fi 6 card (M.2-2230), 2x antenna cable (10 cm), 2x external antennas
  2) CLT02: Antenna kit for 4G expansion consisting of 2 antennas and 2 antenna cables 10cm (not included: M.2-3042 4G/LTE card and nano SIM card)
  3) MDR02: DIN-Rail clip for mounting the Edge-PC SPCEL12 on a DIN-Rail, e.g. in control cabinets.
  4) HDD01: additional 2.5" bay for a SSD drive with SATA interface
• Environmental Specifications
  Operating temperature range: 0 - 40 °C (32 - 104 °F)
  Relative humidity range: 20 - 80 % (non-condensing)
  Warning: Never touch the heatsink during or just after operation, as it can get very hot during normal operation. Be sure to wait for the heatsink to cool off before touching it.
• Certification and Compliance
  EMI: CE, FCC Class A, VCCI, BSMI, EN 50121-3-2
  Safety: CB/IEC 62368-1:2014/2018, cTUVus / UL62368-1:2019, BSMI
  Vibration and Shock: EN61373, MIL-STD-810G
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2014/30/EU relating to electromagnetic compatibility (EMC)
  (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD)
  (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)

Footnotes:

[1] Supports AI accelerator module for AI applications
The M.2-2230 slot of this Edge PC can also be used with an AI accelerator module instead of a WLAN card. The following AI module was successfully tested:
Model: Hailo-8
- Form factor: M.2-2230 Key A+E
- Interface: PCIe Gen-3.0, 2 lanes
- AI compute power: 26 Tera-Operations Per Second (TOPS)
- Typical TDP: 2.5 W
https://hailo.ai/products/ai-accelerators/hailo-8-ai-accelerator/#hailo8-overview