• Fanless and Silent
    Equipped with passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 Nonstop Operation
    This device is approved for 24/7 permanent operation.
    Requirement: Free circulation of air amongst the PC must be guaranteed.
  • Chassis
    Durable and rugged chassis made of aluminium and steel.
    Passive cooling system with specially designed fins to maximize heat dissipation.
    Dimensions: 16,9 x 24,5 x 5,7 cm (LWH) = approx. 2,7 litres
    Weight: 2.85 kg net (Barebone without RAM/SSD and optional expansions)
    IP-rating: IP30
  • Operating Position/Mounting
    1) Desktop: The unit can be placed horizontally to stand on its feet.
    2) VESA Mount: The unit can be affixed to a 75 mm x 75 mm VESA bracket. For this purpose, four M4x6L screws are required to be screwed into the chassis from the top.
    3) Side Brackets (MRS01): The unit can be mounted using two optional 256 mm x 100 mm ear-mount brackets. For this purpose, four M3x6L screws are required to be screwed into the chassis from the bottom.
    4) DIN-Rail (MDR01): Mounted on a standard 35 mm DIN-Rail, e.g. inside equipment racks
    Notes: VESA bracket, Ear-Mount and DIN-Rail clip are not included.
    Vertical mounting is permitted in any orientation.
  • Operating System
    This barebone system comes without operating system.
    It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).
  • Processor
    Model: Intel Core i3-8145UE (ULV)
    System-on-a-chip architecture (SoC) with integrated memory and graphics controller
    FCBGA1528 package - directly soldered onto the mainboard
    Code name: Whiskey Lake-U (8th Generation Intel Core)
    Cores / Threads: 2 / 4
    Clock rate: 2.2 GHz, Turbo clock rate: 3.9 GHz
    L3 Smart Cache: 4 MB
    TDP wattage: 15 W maximum
    Manufacturing process: 3rd-generation enhanced 14nm++
  • Integrated Graphics
    Intel UHD Graphics 620
    GPU clock frequency: 300~1000 MHz
    Execution Units (EUs): 24
    Supports up to three independent screens:
    1) HDMI 1.4 on the backpanel
    2) optional HDMI 1.4,  DisplayPort 1.2, DVI-I or D-Sub/VGA (DDI interface)
    3) optional D-Sub/VGA (eDP interface, limitations: no PnP support)
    Supports resume after power failure
    Supports Wake on LAN (WOL)
    Supports Power on by RTC Alarm
    Supports boot from M.2 SSD cards and USB devices
    AMI BIOS in 32 MB EEPROM with SPI interface
    Supports hardware monitoring and Watchdog function
    Supports Unified Extensible Firmware Interface (UEFI)
  • TPM Module
    Hardware Trusted Platform Module (Infineon SLB9670VQ2, TPM 2.0)
  • Power Adapter
  • Power 



    AC Input

    DC Output

    AC Cable


    0 to +40°C

    Max. 90 W

    100-240V, 50/60Hz

    19V, max. 4.74A

    Schuko to
    IEC 60320 C5

    (optional [1])

    -20 to +60°C

    Max. 150 W
    (95W at 60°C)

    90-260V, 50/60Hz

    19V, max. 7.89A

    Schuko to
    IEC 60320 C13

  • DC Connector: 5.5/2.5 mm (outer/inner diameter)
    AC mains cable: 3 pins, ca. 1.8 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
    Note: The DC input voltage range can optionally be extended to support 9-36 V.
  • Memory support
    2x SO-DIMM slot with 260 pins
    Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,
    maximum total size: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • M.2 Slot for SSDs
    The M.2 2280 M slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X4
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 60 or 80 mm (type 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key) with auto detect
  • Audio
    Audio Realtek® ALC662 or ALC888S High-Definition Audio
    Two analog audio connectors (3.5 mm) on the back panel:
    1) 2 channel line out (headphones)
    2) microphone input
    Digital multi-channel audio output: via HDMI and optional DisplayPort
  • Dual Gigabit LAN
    Dual network with two RJ45 ports
    Used network chips:
    1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface [3]
    2) Intel i219LM PHY connected to the MAC of the processor
    Supports 10 / 100 / 1000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Back Panel connectors
    HDMI 1.4
    4x USB 3.2 Gen 1 Type A (max. 5 Gbps)
    2x Intel Gigabit LAN (RJ45, i211/i219LM) [3]
    Serial COM port (RS232)
    Microphone input (3.5 mm)
    Audio Line-out / Headphones (3.5 mm)
    DC-input connector for external power adapter (2.5 / 5.5 mm)
  • Optional Front Panel connectors
    The front panel is subdivided into four sections to support optional expansion kits with daughter boards in order to add I/O ports. Caution: Only suitably trained persons may open the barebone and install optional components!
    1) second graphics port: HDMI 1.4 (DHD01), DisplayPort 1.2 (DDP01), DVI-I (DDV01) or D-Sub/VGA (DVG01)
    2) third graphics port: D-Sub/VGA
    3) one COM port RS232 (CRS01)
    4) two COM ports RS232/RS422/RS485 - occupies two sections (CSD01)
    5) 4x USB 2.0 - can be installed twice (Note: USB 2.0 ports allow up to 500mA/2.5W power output, but if only low power devices like mouse/keyboard are connected, then up to 4 USB kits can be used) (USB01)
    6) 4x LAN ports with 2.5 Gbps transfer speed (IDL01)
    7) up to four Digital I/O expansion kits, each with 4x Input and 4x Output (DIO11) [2]
    8) Input for car ignition lock enables delayed on/off switching of the BoxPC (DIO11)
    9) LTE kit with two external Antennas (LTE01). Not included: LTE card in M.2-3042 format (e.g. Huawei ME906S, Sierra EM7455, Quectel EM06E) and Nano-SIM card.
    10) Terminal screws to connect a cable for an external Power Button (PWR01)
  • Further optional accessories
    1) Wide range DC-input 9~36 V, instead of only 19 V (VOL01)
    2) Ear-mount brackets, mounting dimensions: 256 mm x 100 mm (MRS01)
    3) DIN-Rail clip (special clip has holes without thread) (MDR01)
    4) WLAN module with two external antennas (WMAX2001+CWL01)
    5) One LAN port in the backpanel can be upgraded to 2.5 Gb/s (IDL11) [3]
  • Environmental Specifications


    Operating Temperature

    Relative humidity

    Standard 0 to +40 °C 20-80 % non-condensing
    Industrial [1] -20 to +60 °C 20-80 % non-condensing
    Notice the footnote [1]
  • Conformity & Certifications
    Safety: CB, cTUVus, BSMI
    Other: RoHS, ErP, CEC
    This device is classed as a technical information equipment (ITE) in Class A , Class A is for product used in commercial and industrial areas. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)

[1] for safe operation in the extended operating temperature range (-20 to +60°C), the optional 150W power supply PA1501 is required and industrial-grade RAM/SSD components with an operating temperature range of -40 ... +85 °C are also required
[2] The DIO expansion kit comes with the appropriate plug connector included. The digital inputs recognize "Low" at 0-3 Volt and "High" at 5-30 Volt (or open). The digital outputs can handle 0-30V (open collector) with up to 30 mA current.
[3] LAN-Port-Upgrade
The yellow LAN port on the back panel (Intel i211 chip) with max. 1 Gbps speed can optionally be upgraded to 2.5 Gbps speed (Intel i226 chip) with the accessory IDL11.