• Fanless and silent
  Passive heatpipe cooling, no fan noise at all
  Perfect to be used in noise-sensitive environments
  Fanless, dust-free and thus virtually maintenance-free
• 24/7 nonstop operation
  This device is approved for 24/7 permanent operation.
  Requirements:
  - Free circulation of air amongst the PC must be guaranteed.
  - Ventilation holes must be kept clear.
  - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer.
• IP54 protected
  The front panel is dust-protected and protected from 
  splashing of water according to protection class IP54.
• Chassis
  Colour: black or white
  Dimensions: 391 x 327 x 42 mm (W x H x D) 
  100mm VESA mount capable
  Mounting hole for Kensington lock
  Weight: 3.5 kg net, 4.2 kg gross
• Operating system
  This system comes without operating system.
  It is compatible with:
  - Windows 10/11 - 64-bit
  - Linux - 64-bit
• Touchscreen
  Touchscreen function supports fingertip input
  Resistive 5-wire single-touch  technology
  Stylus for the built-in touchscreen
• 39.6cm display (15.6")
  39.6 cm / 15.6" LC-display, ratio: 16:9 wide-screen panel
  Resolution: 1366 x 768 = 1.05 Megapixel
  Backlight unit: High power LED, Luminance: 220 cd/sqm
  Glass thickness: 3.2 mm
• Processor
  Model: Intel Celeron 7305
  Code name: Alder Lake-U (12th generation Intel Core)
  Performance-cores (P-Cores): 1 core (1 thread), clock rate: 1.1 GHz
  Efficient-cores (E-Cores): 4 cores (4 threads), clock rate: 0.9 GHz
  Smart-Cache (L3): 8 MB
  Base Power (PL1 TDP): max. 15 W
  Maximum Tjunction Temperature: 100 °C
  System-on-a-chip architecture (SoC) with integrated memory and graphics controller
  BGA1700 package - directly soldered onto the mainboard
  Lithography: Intel 7 process (10 nm Enhanced SuperFin)
• Integrated Graphics
  Intel UHD Graphics
  GPU clock frequency: max. 1100 MHz
  Execution Units (EUs): 48
• Up to three displays simultaneously
  Two video ports support two additional independent screens:
  1) HDMI 2.0b digital audio/video port supports up to 3840 x 2160 pixels resolution at 60 Hz refresh rate (2160p60)
  2) VGA / D-Sub analog video port supports 1920 x 1080 pixels resolution at 60 Hz refresh rate (1080p60)
  Special conditions for operation in Multi-Monitor mode:
  1) Clone mode: all displays show the same content at 1366x768 resolution
  2) Extended mode: all displays show different content
• BIOS
  AMI BIOS in 32 MByte EEPROM with SPI interface
  Supports Power fail resume / always on
  Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
  Supports hardware monitoring and Watchdog functionality
  Supports Firmware TPM v2.0 functionality
• Memory
  2x SO-DIMM slot with 262 pins
  Supports DDR5-4800 (PC5-38400) SDRAM at 1.1 V
  Supports DDR5 memory modules with higher frequency rating
  Supports Dual Channel mode
  Supports a maximum of 32 GB per DIMM,
  maximum total size: 64 GB
  Supports two unbuffered DIMM modules (no ECC or registered)
  Two thermal pads for the RAM modules are included
• Hard disk drive / SSD
  Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
  The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
  Supports one drive with up to 9.5 mm in height
  SATA data/power cable pre-installed
• Two M.2-2280 Slots for SSD cards
  This product features two M.2-2280 Key-M slots
  - it supports M.2 cards with a width of 22 mm and a length of 80 mm (type 2280)
  - one M.2 SSD card with PCIe/NVMe interface is supported
  - the second M.2 SSD card must have SATA interface
  - the second slot can also be used for the optional WWN04 kit to support a 4G/5G wireless network card
  The following configurations are supported:

  M.2 Slot	Inferfaces	Config 1	Config 2	Config 3
  Slot 1 CN6, above	PCIe Gen4 x4 and SATA 3.0	M.2 SSD card (SATA)	M.2 SSD card (PCIe/NVMe)	M.2 SSD card (SATA)
  Slot 2 CN5, below	PCIe Gen4 x4 and USB 3.2 Gen2 *)	M.2 SSD card (PCIe/NVMe)	optional WWN04 kit	optional WWN04 kit

  *) the USB 3.2 interface can only be used with the Shuttle Accessory WWN04
  Two thermal pads for the M.2 SSDs are included (size: 70 x 20 x 5.5 mm).
• Webcam
  Integrated Full HD webcam (1920 x 1080 pixels)
• Microphone and speakers
  Front panel with integrated Electret Condenser Microphone and
  2x 2 W speakers
• Integrated Audio
  Realtek ALC888S (HD-Audio)
  Two analog audio connectors (3.5 mm) on the bottom side: 
  1) Line-out (head-phones)
  2) Microphone input
  Digital Audio is supported via the HDMI output.
• Wired Network
  Intel i219 Ethernet Controller
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports WAKE ON LAN (WOL) from S3, S4 modes
  Supports network boot by Preboot eXecution Environment (PXE)
• Wireless Network (WLAN)
  WLAN controller Card: Realtek RTL8821CE
  WLAN antennas: two internal antennas
  Supports WiFi IEEE 802.11b/g/n/ac on the 2.4 / 5 GHz band, 1T1R
  Supports 20 / 40 / 80 MHz channel bandwidth
  Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
  Supports Bluetooth 4.2 on the 2.4 GHz band
  The M.2-2230 Key A+E slot supports PCIe Gen3 x1, USB 2.0 und CNVi
• Front LEDs
  Power LED (blue)
  HDD/SSD LED (orange)
• Connectors left side
  Power button
  2x USB 3.2 Gen 1 (max. 5 Gbps, blue)
  Hole with hidden power button (onboard micro switch)
  Hole with hidden Clear CMOS button (onboard micro switch)
• Connectors bottom side
  HDMI 2.0b (supports digital video and digital audio)
  VGA connector (D-Sub 15 pol., analog video)
  2x USB 3.2 Gen 2 (max. 10 Gbps, red)
  2x USB 3.2 Gen 1 (max. 5 Gbps, blue)
  Gigabit Network (LAN, RJ45, Intel i219)
  Audio Line-out / head-phones (3.5 mm jack)
  Microphone input (3.5 mm jack)
  DC input for external power adapter (5.5 / 2.5 mm)
  Optional: 2x COM/serial D-Sub (1x RS232, 1x RS232/422/485)
• Connectors onboard
  Internal USB 2.0 type A connector for a USB stick
  Serial ATA (6 Gbps) data/power connector
  2x serial interfaces for optional COM ports (each 2x5-pin, 2 mm pitch)
  Other available connectors are occupied by integrated components.
• Opening holes for four optional antennas
  The chassis features four perforated 6.5 mm holes
  for optional antennas mounted with an (RP-)SMA connector
  for wireless network such as WLAN or WWAN (e.g. 4G/5G)
  (see section "Optional Accessories")
• Power adapter
  External 90 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, max. 4.74 A, max. 90 W
  DC cable length: ca. 170 cm
  AC cable length: ca. 170 cm (3-pin Micky MM C6 and Schuko earthed safety plug)
• DC Input connector
  DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
  The DC-input of the computer supports an external
  power source with either 12V±5% or 19V±5%.
• Included Accessories:
  Multilingual Quick Guide
  Driver DVD for Windows
  External  Power Adapter (90W / 19V)
  AC Power cord with protective-earth contacts
  2x Thermal Pads for SSD M.2 cards: 70 x 20 x 5.25 mm
  2x Thermal Pads for RAM modules: 50 x 15 x 2.25 mm and 70 x 20 x 4 mm
  3x M3x4 silver screws for mounting M.2 SSD cards
  4x M3x4 black screws for mounting a 2.5" SATA drive
• Optional Accessories:
  1) WLAN Kit WLN-M1 (Intel AX200 card + two external antennas)
  An 802.11ac (1T1R) WLAN function with internal antennas is already pre-installed and can be upgraded to 802.11ax (2T2R) with two external antennas with this kit.
  2) 4G/5G Kit WWN04
  This kit includes an adapter board for the lower M.2-2280 slot (CN5) and four external antennas.
  For data transmission in the mobile network, the these additional components are required
  - a 4G/LTE card in M.2-3042 format or a 5G card in M.2-3052 format
  - an activated nano SIM card
  3) COM port adapter 2x PCP11 
  provides two serial COM ports (1x RS232, 1x RS232/422/485) on the bottom side
  4) Robust VESA Stand POV21: 
  supports one or two AIO-PCs/Displays with 75x75 or 100x100 mm VESA (max. 21.5" display size and 20 kg total weight). 
• Environmental criteria
  Operating temperature: 0~40 °C
  Humidity: 10~90 %, non-condensing
• Certification and Compliance
  EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
  Safety: CB (IEC 60950/62368), cTUVus (UL 62368), BSMI
  Other compliances: RoHS, ErP Lot3, Energy Star v8.0
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
  (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP),
  (4) 2014/53/EU Radio Equipment Directive (RED)