P90U3
  • Fanless and silent
    Passive heatpipe cooling, absolutely no fan noise
    Perfect for noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be kept clear.
    - If a hard disk is installed, this must also be approved for permanent 
    operation by its manufacturer.
  • IP54 protected
    The front panel is dust-protected and protected from 
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black or white
    Dimensions: 487 × 321 × 44 mm (W × H × D) 
    100 mm VESA mountable
    Hole for Kensington lock
    Weight: 4.29 kg net, 5.62 kg gross
  • Operating system
    This system comes without operating system.
    It is compatible with:
    - Windows 10 - 64-bit
    - Linux - 64-bit
  • Touchscreen
    Touchscreen function supports fingertip input
    Capacitive Touch Panel with 10-point multi-touch
    Supports input with gloves (PVC, cotton, cotton/linen)
    Stylus pen not supported
  • 49.5 cm display (19.5")
    49.5 cm / 19.5" LCD display
    Ratio: 16:9 wide-screen panel
    Resolution: 1600 × 900 = 1.44 Megapixel (WSXGA/HD+)
  • Processor
    Model: Intel Core i3-7100U (ULV)
    System-on-a-chip architecture (SoC): no chipset required
    BGA1356 package - directly soldered onto the mainboard
    Code name: Kaby Lake-U (7th Generation Intel Core)
    Cores / Threads: 2 / 4
    Clock rate: 2.4 GHz
    L1/L2/L3 Cache: 128 kB / 512 kB / 3072 kB
    Memory controller: DDR4-2133 Dual Channel (1.2 V)
    TDP wattage: 15 W maximum
    Manufacturing process: 14 nm
    Maximum Tjunction Temperature: 100 °C
    Supports Hyper-Threading (HT), 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
    Integrated graphics engine
  • Integrated Graphics
    Intel HD Graphics 620
    GPU clock frequency: 300~1000 MHz
    Execution Units (EUs): 24
    Supports DirectX 12
    Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
    Supports Quick Sync Video and Clear Video HD technology
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 1.4b supports 1920 × 1080 @ 60 Hz or 3840 × 2160 @ 30 Hz
    2) VGA / D-Sub analog video supports 1920 × 1080 @ 60 Hz
    Multi-Monitoring modes as follow:
    Clone mode: All displays show the same content at 1600 × 900.
    Extended mode: all displays show different content.
  • BIOS
    AMI BIOS in 8 MByte EEPROM with SPI interface
    Supports Power-on-after-power-fail / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and Watchdog function
    Supports Firmware TPM v2.0 function
  • Memory
    2× SO-DIMM slot with 260 pins
    Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
    Supports Dual Channel mode
    Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • Hard disk drive / SSD
    Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
    The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
    Supports one drive with up to 12.5 mm in height
    SATA cable pre-installed
  • M.2-2280 Slot
    The M.2 2280 BM slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X4 with up to 32 Gbps of data transfer speed
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory cards
  • Webcam
    Integrated Full HD webcam (1920 × 1080 pixels)
  • Microphone and speakers
    Front panel with integrated Electret Condenser Microphone and
    2× 2 W speakers
  • Integrated Audio
    Realtek ALC269 Audio Codec
    Two analog audio connectors (3.5 mm) on the bottom side: 
    1) Line-out (head-phones)
    2) Microphone input
    Digital Audio is supported via HDMI.
  • Wired Network
    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL) from S3, S4 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    Model: AzureWave AW-CB209NF
    Chipset: Realtek RTL8821AE
    M.2-2230 (NGFF) extension card
    Connected with two internal antennas (via IPEX4)
    Supports WiFi IEEE 802.11b/g/n/ac in the 2.4/5 GHz band, 1T1R
    Max. 72.2 / 150 Mbps using 20 / 40 MHz bandwidth in n-mode
    Max. 433.3 Mbps using 80 MHz bandwidth in ac-mode
    Supports Bluetooth 4.1 in the 2.4 GHz band (BT 4.0 under Linux)
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
  • Connectors left side
    Power button
    2× USB 2.0
    SD card reader
    Hole with power button
    Perforation for optional WLAN/LTE antenna (diameter: 7 mm)
  • Connectors bottom side
    HDMI 1.4b (supports digital video and digital audio)
    2× USB 3.2 Gen 1
    2× USB 2.0
    Gigabit Network (LAN, RJ45)
    Audio Line-out / head-phones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    DC input for external power adapter (5.5 / 2.5 mm)
    Perforation for optional WLAN/LTE antenna (diameter: 7 mm)
    Optional: 2× COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01)
  • Connectors rear side
    VGA connector (D-Sub 15 pol., analog video)
    Optional: 2× COM/serial (D-Sub), 1× LPT/parallel (accessory: PCL71 or POS01)
  • Connectors onboard
    Internal USB 2.0 type A connector for a USB stick
    Serial ATA (6 Gbps)
    Serial ATA power connector
    3× USB 2.0 header (all occupied)
    eDP connector (Embedded DisplayPort) - occupied by the display
    Connector for optional COM/LPT adapter POS01 or PCL71
  • Opening holes for optional antennas
    The chassis features two perforated 7 mm holes
    for optional antennas mounted with an (RP-)SMA connector
    for wireless network such as WLAN or WWAN (e.g. LTE)
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V ±5 % or 19V ± 5%.
  • Included Accessories
    Quick Guide
    Driver DVD
    External  Power Adapter (65W / 19V)
    Power cord
    Screws
  • Optional Accessories
    PCL71: COM / LPT / RJ11 adapter:
    - 1× Parallel (25p D-Sub)
    - 2× Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
    POS01: COM / LPT / RJ11 adapter:
    - 1× Parallel (25p D-Sub)
    - 2× Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
    - 2× Serial RS232 (8p RJ45)
    - 1× DIO/RJ11 connector for cash drawer supports 12 / 24V
    PNFC02: NFC module (no Linux and transaction support)
    - Note: PNFC02 is only available on request
  • Environmental criteria
    Operating temperature: 0~40 °C
    Humidity: 10~90 %
  • Certification and Compliance
    EMI: CE, RED, FCC, RCM, VCCI
    Safety: CB, ETL
    Other compliances: RoHS, ErP Lot3, Energy Star v7.0
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EU relating to ecodesign requirements for energy-related products (ErP),
    (4) 2014/53/EU related to Radio and Telecommunications Terminal Equipment (RED)