• Fanless and silent
  Passive heatpipe cooling, absolutely no fan noise
  Perfect for noise-sensitive environments
  Fanless, dust-free and thus virtually maintenance-free
• 24/7 nonstop operation
  This device is approved for 24/7 permanent operation.
  Requirements:
  - Free circulation of air amongst the PC must be guaranteed.
  - Ventilation holes must be kept clear.
  - If a hard disk is installed, this must also be approved 
  for permanent operation by its manufacturer.
• IP54 protected
  The front panel is dust-protected and protected from 
  splashing of water according to protection class IP54.
• Chassis
  Colour: black
  Dimensions: 393.6 x 272.5 x 39.8 mm (W x H x D) 
  100 mm VESA mountable
  Hole for Kensington lock
  Weight: 3.25 kg net, 4.5 kg gross
• Operating system
  This system comes without operating system.
  It is compatible with:
  - Windows 11 - 64-bit
  - Windows 10 - 64-bit
  - Linux - 64-bit
• Touchscreen
  Touchscreen function supports fingertip input
  Capacitive Touch Panel with 10-point multi-touch
  Supports touch input with gloves made of PVC, cotton, cotton/linen - max. 0.4 mm thick
  Stylus pen not supported
• 39.6 cm display (15.6")
  39.6 cm / 15.6" LC display, IPS technology
  Ratio: 16:9 wide-screen panel
  Native resolution: 1920 x 1080 = 2 Megapixel (Full HD / 1080p)
  Brightness: 250 cd/sqm
• Processor
  Model: Intel Core i3-10110U (ULV)
  System-on-a-chip architecture (SoC) with integrated memory and graphics controller
  FCBGA1528 package - directly soldered onto the mainboard
  Code name: Comet Lake U (10th Generation Intel Core)
  Cores / Threads: 2 / 4
  Base frequency: 2.1 GHz
  Max. Turbo frequency: 4.1 GHz
  Intel Smart Cache: 4 MB
  TDP wattage: 15 W maximum
  Manufacturing process: 14nm
  Maximum Tjunction Temperature: 100 °C
  Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
• Integrated Graphics
  Intel UHD Graphics 620
  GPU clock frequency: 300~1000 MHz
  Execution Units (EUs): 23
  Supports DirectX 12, OpenGL 4.5
  Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
  Supports Quick Sync Video and Clear Video HD technology
• Up to three displays simultaneously
  Two video ports support two additional independent screens:
  1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
  2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
  Multi-Monitoring modes as follow:
  Clone mode: All displays show the same content at 1920 x 1080.
  Extended mode: All displays show different content.
• BIOS
  AMI BIOS in 16 MByte EEPROM with SPI interface
  Supports Power-on-after-power-fail / always on
  Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
  Supports hardware monitoring and Watchdog function
  Supports Firmware TPM v2.0 function
• Memory
  2x SO-DIMM slot with 260 pins
  Supports DDR4-2666 (PC4-21300) SDRAM at 1.2 V
  Also compatible with DDR4-3200 memory modules
  Supports Dual Channel mode
  Supports a maximum of 32 GB per DIMM,  maximum capacity: 64 GB
  Supports two unbuffered DIMM modules (no ECC or registered)
• 2.5" Hard disk drive / SSD
  Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
  The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
  Supports one drive with up to 9.5 mm in height
  SATA cable pre-installed
• M.2-2280 Slot
  The M.2 2280 BM slot provides the following interfaces:
  - PCI-Express Gen. 3.0 X4
  - SATA v3.0 (max. 6 Gbps)
  It supports M.2 cards with a width of 22 mm and a length of 80mm.
  Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe-SSDs (with M key)
• Card Reader
  Integrated card reader supports SD, SDHC and SDXC memory flash cards
• Webcam
  Integrated Full-HD 2.0 Megapixel (1920 x 1080)  camera
• Microphone and speakers
  Front panel with integrated Electret Condenser Microphone and
  2x 2 W speakers
• Integrated Audio
  C-Media CM6542 (USB) or Realtek ALC269 (HD Audio)
  Two analog audio connectors (3.5 mm) on the bottom side: 
  1) Line-out (head-phones)
  2) Microphone input
  Digital Audio is supported via HDMI.
• Wired Network
  Intel 219 Ethernet Controller
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports WAKE ON LAN (WOL) from S3, S4 modes
  Supports network boot by Preboot eXecution Environment (PXE)
• M.2 slot for WLAN
  M.2-2230E slot supports USB2.0, PCIe X1 and CNVi
  suitable for commonly available WLAN modules in M.2 format
  Two internal WLAN antennas for 2.4/5 GHz are already pre-installed.
  The chassis has two 7-mm perforations for optional external antennas.
• Front LEDs
  Power LED (blue)
  Hard disk LED (orange)
  Battery LED (red) - reserved, no function
• Connectors left side
  Power button
  2x USB 3.2 Gen. 1 (max. 5 Gb/s, blue)
  SD card reader
  Hole with Clear CMOS button
• Connectors right side
  Optional: 2x COM/serial (D-Sub, RS232)
  Hole for the Kensington Lock
• Connectors bottom side
  HDMI 1.4b (supports digital video and digital audio)
  VGA connector (D-Sub 15 pol., analog video)
  2x USB 3.2 Gen. 1 ( max. 5 Gb/s, blue)
  2x USB 2.0
  2x COM/serial (D-Sub, RS232)
  Gigabit Network (LAN, RJ45)
  Audio Line-out / headphones (3.5 mm jack)
  Microphone input (3.5 mm jack)
  DC input for external power adapter (5.5 / 2.5 mm)
  2x Perforation for optional WLAN/LTE antennas (diameter: 7 mm)
• Connectors onboard
  Internal USB 2.0 type A connector for a USB stick
  Serial ATA (6 Gbps) data/power combo connector
  3x USB 2.0 header (all occupied)
  Microphone connector (2-pin, occupied)
  Speakers connector (4-pin, occupied)
  eDP connector (Embedded DisplayPort) - occupied by the display
  LPC connector (occupied)
  I2C connector
  CMOS battery connector (2-pin occupied)
• Opening holes for optional antennas
  The chassis features two perforated 7 mm holes
  for optional antennas mounted with an (RP-)SMA connector
  for wireless network such as WLAN or WWAN (e.g. LTE)
• Power adapter
  External 65 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, max. 3.42 A, max. 65 W
• DC Input connector
  DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
  The DC-input of the computer supports an external
  power source with either 12V ±5 % or 19V ± 5%.
• Included Accessories
  Quick Guide
  Driver DVD
  2x bracket to install a 2.5" drive
  External Power Adapter (65W / 19V)
  Power cord (2 pins)
  Screws (2x for M.2 slots, 8x for 2.5" bay)
• Optional Accessories
  1) COM port adapter PCP21 or 2x PCP11  
  provides two more serial COM ports on the right side
  2) M.2 WLAN module with two external Antennas:
  WLN-M (802.11ac) or WLN-M1 (802.11ax)
  Two internal WLAN antennas are already pre-installed and can be used instead of the external antennas.
• Environmental criteria
  Operating temperature: 0~40 °C
  Humidity: 10~90 %
• Certification and Compliance
  - EMI: CE, UKCA, FCC, RCM, VCCI, BSMI
  - Safety: CB 60950/62368, cTUVus, BSMI
  - Other compliances: RoHS, ErP Lot3, Energy Star
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
  (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EU relating to ecodesign requirements for energy-related products (ErP)