P25N
  • Fanless and silent
    Passive heatpipe cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be kept clear.
    - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer.
  • IP54 protected
    The front panel is dust-protected and protected from 
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black
    Dimensions: 29.9 x 20.7 x 5.9 cm (W x H x D)
    75x75 mm VESA mount capable
    Mounting hole for Kensington lock
    Weight: 1.95 kg net, 3.14 kg gross
  • Operating system
    This system comes without operating system.
    It is compatible with:
    - Windows 10/11 - 64-bit
    - Linux - 64-bit
  • Touchscreen
    Touchscreen function supports fingertip input
    Capacitive Touch Panel with 10-point multi-touch
    Supports input with gloves (PVC, cotton, cotton/linen)
    Stylus pen not supported
  • 29.5 cm display (11.6")
    29.5 cm / 11.6" LCD TN display
    Aspect ratio: 16:9 widescreen
    Resolution: 1366 x 768 = 1.05 Megapixel
    Backlight unit: LED, Luminance: 250 cd/sqm (typ.)
    Glass thickness: 3 mm
  • Processor
    Model: Intel N100
    System-on-a-chip architecture (SoC): no chipset required
    FCBGA1264 package - directly soldered onto the mainboard
    Code name: Alder Lake-N  (12th Generation Intel Core)
    Cores / Threads: 4 / 4
    Turbo clock rate: max. 3.4 GHz
    Smart Cache: 6 MB
    TDP wattage: 6 W
    Manufacturing process: Intel 7
    Maximum Tjunction Temperature: 105 °C
  • Integrated Graphics
    Intel UHD Graphics
    GPU clock frequency: max. 750 MHz
    Execution Units (EUs): 24
    Supports DirectX 12.1
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 2.0b supports 3840 x 2160 @ 60 Hz
    2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
    Special conditions for operation in Multi-Monitor mode:
    1) Clone mode: all displays show the same content at 1366x768 resolution
    2) Extended mode: all displays show different content
  • BIOS
    AMI BIOS in 32 MByte EEPROM with SPI interface
    Supports Power fail resume / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and Watchdog functionality
    Supports Firmware TPM v2.0 functionality
  • Memory
    1x SO-DIMM slot with 262 pins
    Supports DDR5-4800 (PC5-38400) SDRAM at 1.1 V
    or DDR5 memory with higher clock rate
    Supports a maximum capacity of 16 GB
  • Hard disk drive / SSD
    Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
    The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
    Supports one drive with up to 9.5 mm in height
    SATA cable pre-installed
  • M.2-2280 Slot
    The M.2 2280 M slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X2
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 80 mm (type 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
  • Webcam
    Integrated Full HD webcam (1920 x 1080 pixels = 2 MP)
  • Microphone and speakers
    With integrated Electret Condenser Microphone and 2 W speaker
  • Integrated Audio
    Realtek ALC888S (HD-Audio)
    Two analog audio connectors (3.5 mm) on the left side: 
    1) Line-out (head-phones)
    2) Microphone input
    Digital multi-channel audio output is supported via HDMI.
  • Wired Network
    Intel i226LM Ethernet Controller
    Supports 10 / 100 / 1.000 / 2500 Mbps operation
    Supports WAKE ON LAN (WOL) from S3/S4/S5 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    Built-in M.2-2230-E WLAN card with two internal antennas
    WLAN Controller Realtek RTL8821CE
    Supports WiFi IEEE 802.11b/g/n/ac on the 2.4 / 5 GHz band, 1T1R
    Supports 20 / 40 / 80 MHz channel bandwidth
    Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
    Supports Bluetooth 4.2 on the 2.4 GHz band
  • Opening holes for optional antennas
    The chassis features two perforated 6.5 mm holes
    for optional antennas mounted with an (RP-)SMA connector
    for wireless network such as WLAN
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
  • Connectors left side
    Power button
    2x USB 3.2 Gen 2 (type A, red, max. 10 Gbps)
    Audio Line-out / headphones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    Hole with Clear CMOS button
  • Connectors right side
    Mounting hole for Kensington lock
  • Connectors bottom side
    HDMI 2.0b (supports digital video and digital audio)
    VGA connector (D-Sub 15 pol., analog video)
    4x USB 3.2 Gen 2 (type A, blue, max. 5 Gbps)
    2.5G Network (LAN, RJ45)
    2x COM port (RS232)
    DC input for external power adapter (5.5 / 2.5 mm)
  • Jumper Configuration
    Jumper JP1 for power-on-after-power-fail (hardware solution) [1]
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
    DC cable, ca. 170cm, 5.5 / 2.5 mm plug
    AC cable, ca. 170 cm, 3-pin Micky MM C6 and Schuko earthed safety plug
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V±5% and 19V±5%.
  • Included Accessories:
    Quick Installation Guide
    Windows 10/11 Driver DVD
    External Power Adapter (65W / 19V) with 3-pin AC cable
  • Optional Accessories:
    WLN-M1: WLAN kit with Intel AX200 WLAN card (supports WLAN-ax / Wi-Fi 6) and two external antennas
    Note: a WLAN-ac / Wi-Fi 5 module with two internal antennas is already pre-installed by default.
  • Environmental criteria
    Operating temperature: 0~40 °C
    Humidity: 10~90 %, non-condensing
  • Certification and Compliance
    EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
    Safety: CB (IEC 60950/62368), cTUVus (UL 62368-1:2014), BSMI
    Other compliances: RoHS, ErP Lot3, Energy Star v8.0
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
    (4) 2014/53/EU Radio Equipment Directive (RED)

[1] Power-on-after-power-fail
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power-on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing Jumper JP1 (on the mainboard near the power button) the system will start unconditionally once power is supplied.