
- Fanless and silent
Passive heatpipe cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must be kept clear.
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer. - IP54 protected
The front panel is dust-protected and protected from
splashing of water according to protection class IP54. - Chassis
Colour: black
Dimensions:
- without cable collector box: 29.9 x 20.3 x 5.0 cm (W x H x D)
- with cable collector box: 29.9 x 27.1 x 5.0 cm (W x H x D)
100 mm VESA mount capable
Mounting hole for Kensington lock
Weight: 2.47 kg net, 3.39 kg gross - Operating system
This system comes without operating system.
It is compatible with:
- Windows 10/11 - 64-bit
- Linux - 64-bit - Touchscreen
Touchscreen function supports fingertip input
Capacitive Touch Panel with 10-point multi-touch
Supports input with gloves (PVC, cotton, cotton/linen)
Stylus pen not supported - 29.5 cm display (11.6")
29.5 cm / 11.6" LCD TN display
Aspect ratio: 16:9 widescreen
Resolution: 1366 x 768 = 1.05 Megapixel
Backlight unit: LED, Luminance: 250 cd/sqm (typ.)
Glass thickness: 3.2 mm, Anti-Glare - Processor
Model: Intel Celeron 5205U (ULV)
System-on-a-chip architecture (SoC): no chipset required
FCBGA1528 package - directly soldered onto the mainboard
Code name: Comet Lake-U (10th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.9 GHz
L1/L2/L3 Cache: 256 kB / 1 MB / 2 MB
Memory controller: DDR4-2400 Dual Channel (1.2 V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 - Integrated Graphics
Intel UHD Graphics 610
GPU clock frequency: 300~900 MHz
Execution Units (EUs): 12
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology - Up to three displays simultaneously
Two video ports support two additional independent screens:
1) HDMI 1.4a supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
Special conditions for operation in Multi-Monitor mode:
1) Clone mode: all displays show the same content at 1366x768 resolution
2) Extended mode: all displays show different content - BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports Power fail resume / always on
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports hardware monitoring and Watchdog functionality
Supports Firmware TPM v2.0 functionality - Memory
2x SO-DIMM slot with 260 pins
Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered) - Hard disk drive / SSD
Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
Supports one drive with up to 9.5 mm in height
SATA cable pre-installed - M.2-2280 Slot
The M.2 2280 M slot provides the following interfaces:
- PCI-Express Gen. 2.0 X4
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 80 mm (type 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) - Card Reader
Integrated card reader supports SD, SDHC and SDXC memory flash cards - Webcam
Integrated Full HD webcam (1920 x 1080 pixels) - Microphone and speakers
With integrated Electret Condenser Microphone and 2 W speaker - Integrated Audio
Realtek ALC269 (HD-Audio) or C-Media CM6542 (USB)
Two analog audio connectors (3.5 mm) on the bottom side:
1) Line-out (head-phones)
2) Microphone input
Digital Audio is supported via HDMI. - Wired Network
Intel i219 Ethernet interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL) from S3, S4 modes
Supports network boot by Preboot eXecution Environment (PXE) - Prepared for Wireless Network (WLAN)
2x pre-installed internal antenna
WLAN card not included
Prepared for the installation of an M.2-2230 WLAN card - Opening holes for optional antennas
The chassis features two perforated 6.5 mm holes
for optional antennas mounted with an (RP-)SMA connector
for wireless network such as WLAN or WWAN (e.g. LTE) - Front LEDs
Power LED (blue)
Hard disk LED (orange) - Connectors left side
Power button
2x USB 3.2 Gen 1 (type A)
SD card reader
Hole with Clear CMOS button
Mounting hole for Kensington lock - Connectors right side
Optional: 2x COM port (RS232) - Connectors bottom side
HDMI 1.4 (supports digital video and digital audio)
VGA connector (D-Sub 15 pol., analog video)
2x USB 3.2 Gen 1 (type A)
2x USB 2.0 (type A)
Gigabit Network (LAN, RJ45)
2x COM port (RS232)
Audio Line-out / headphones (3.5 mm jack)
Microphone input (3.5 mm jack)
DC input for external power adapter (5.5 / 2.5 mm) - Connectors onboard
Internal USB 2.0 type A connector for an USB cable
Serial ATA (data and power)
3x USB 2.0 header (all occupied)
eDP connector (Embedded DisplayPort) - occupied by the display
LPC connector (occupied)
I2C connector - Power adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% and 19V±5%. - Included Accessories:
Quick Installation Guide
Windows 10 Driver DVD
External Power Adapter (65W / 19V) with DC cable (approx. 1.7 m)
Power cord with Euro plug (approx. 1.75 m) - Optional Accessories:
1) COM port adapter PCP21 or 2x PCP11 provides two more serial COM ports on the right side
2) WLAN kit WLN-M/M1 with two external antennas - Environmental criteria
Operating temperature: 0~40 °C
Humidity: 10~90 %, non-condensing - Certification and Compliance
EMI: CE, FCC, BSMI, RCM, VCCI
Safety: CB (IEC 60950/62368), cTUVus, BSMI
Other compliances: RoHS, ErP Lot3, Energy Star v8.0 - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)