SH610R4
  • Chassis
    Black aluminium chassis with acrylic front plate
    Customisable front panel design: simply change the mylar and add a personal design
    such as a photo, graphics or a logo to the front panel.
    Storage bays: 1 x 5.25" (external), 2 x 3.5" (internal)
    Dimensions: 32.9 x 21,6 x 19.0 cm (LWH without feet) = 13.4 litres
    Height with rubber feet: 19.7 cm
    Weight: 3.4 kg net / 4.5 kg gross
  • Mainboard / Chipset
    Mainboard with Shuttle form factor 275x195 mm, proprietary design for XPC SH610R4
    Chipset/Southbridge: Intel® H610
    Passive chipset cooling with heat sink
    The Northbridge is integrated in the processor.
    Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
  • BIOS
    AMI BIOS, SPI Interface, 32 MB Flash-EEPROM
    Supports Hardware Monitoring, Watch Dog
    Supports Power Fail Resume
    Supports Firmware-TPM (fTPM) v2.0
    Supports boot up from external USB flash memory
    Supports Unified Extensible Firmware Interface (UEFI)
  • Power supply
    Built-in 300 Watt mini switching power supply [1]
    AC input voltage: 100~240V, 50~60 Hz
    80 PLUS Bronze compliant: The PSU provides at least 
    82/85/82% of efficiency at 20/50/100% of load.
    Active PFC circuit (Power Factor Correction)
    ATX main power connectors: 2x10 and 2x2-pin
    Graphics power connector: 6-pin
    Other connectors: 4x SATA, 2x Molex
  • Operating System
    This system comes without operating system.
    It is compatible with Windows 10/11 (64-bit) and Linux (64-bit)
  • Processor support
    Processor Socket LGA1700
    Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
    Supports 12th,13th and 14th generation Intel Core processors, codename "Alder Lake-S" and "Raptor Lake-S [Refresh]"
    (14th generation: see footnote [4])
    in "Intel 7" process technology (previously Intel 10 nm Enhanced SuperFin)
    Maximum supported processor power consumption (TDP) = 125 W
    Does not support the unlock-function of Intel K-Series processors.
    The processor integrates PCI-Express, memory controller
    and the graphics engine on the same die.
    However, processors with "F" identifier do not support integrated graphics [3]
    (performance features  depending on processor type)
    Please refer to the support list for detailed processor support information at global.shuttle.com.
  • Heat-pipe processor cooling
    Shuttle I.C.E. (Integrated Cooling Engine)
    advanced I.C.E. heatpipe technology, linear-controlled 92mm fan
    SilentX cooling and noise reduction technology with Active Airflow
  • Memory support
    2x 288-pin slot
    Supports DDR4-3200/2933/2666/2400/2133 (PC4-25600/23466/21300/19200/17000) SDRAM at 1.2 V
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,
    maximum total size: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • PCIe Expansion Slots
    1x PCI-Express x16 v5.0 slot
    1x PCI-Express x1 v3.0 slot, open-ended
    Supports dual-slot (double-width) graphics cards (occupies the second PCI-Express slot)
    The maximum size acceptable for display cards is 273 x 98 x 38 mm.
    Graphics power connector: 6 pins [1]
    Please refer to the support list for detailed support information at global.shuttle.com.
  • Integrated Graphics (optional [3])
    The features of the integrated Intel UHD graphics function  depend on the processor type used.
    Certain processor models do not support integrated graphics [3]
    The PC features four video outputs
    (three of them can be used at the same time):
    - 1x HDMI v2.0b
    - 2x DisplayPort v1.4
    - 1x D-Sub/VGA
    HDMI 2.0b and DisplayPort support displays with 4K Ultra HD resolution at 3840 x 2160 at 60 Hz refresh rate (2160p/60)
    Supports three independent displays with the integrated graphics function
    Supports more displays in combination with a discrete graphics card
    DisplayPort and HDMI support multi-channel digital audio over the same cable
  • Drive bays
    Storage bays: 1 x 5.25" (external), 2 x 3.5" (internal)
    Using the optional accessory PHD3 
    two 2.5" drives can be installed into one 3.5" bay.
  • SATA connectors
    3x Serial ATA 6G connector onboard (rev. 3.0, max. 6 Gbit/s)
  • M.2-2280M SSD slot
    The M.2 2280M slot provides the following interfaces:
    - PCI-Express Gen. 4.0 X4, supports NVMe
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
    Supports M.2 SSDs with SATA or PCI-Express interface
    A self-adhesive thermal pad (65 x 15 x 7 mm) is included and has to be stuck between the SSD card and the mainboard.
  • M.2-2230E slot for WLAN cards
    Interfaces: PCI-Express Gen. 3.0 X1 und USB 2.0
    Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
    Supports WLAN extension cards (optional Shuttle accessory: WLN-M / WLN-M1)
  • HD audio
    Audio Codec: Realtek ALC888 / ALC662 / ALC897, 5.1 channel
    Three analog audio connectors (3.5mm) at the backpanel: 
    Line-in (blue), line-out (green) and microphone input (pink)
    shared with 5.1 channel line-out (front, rear, center/bass)
    Front panel: microphone input and head-phones output (line-out)
    DisplayPort and HDMI support multi-channel digital audio over the same cable
  • Gigabit LAN
    Intel i219 Ethernet Controller
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Front Panel connectors and buttons
    Microphone input (3.5 mm)
    Headphone output (3.5 mm)
    2x USB 3.2 Gen 1 (max. 5 Gbps), blue
    Power button
    Power indicator (Blue LED)
    Hard disk drive indicator (Yellow LED)
  • Back Panel connectors
    1x HDMI 2.0b
    2x DisplayPort 1.4 [2]
    1x D-Sub VGA (analog)
    2x USB 3.2 Gen 1 (max. 5 Gbps), blue
    4x USB 2.0 (black)
    1x Gigabit LAN (RJ45)
    1x Audio Line-out (3.5 mm)
    1x Audio Line-in (3.5 mm)
    1x Microphone Input (3.5 mm)
    1x 4-pin connector (2.54 mm pitch) supports:
    - external power on button
    - Clear CMOS function
    - 5V DC voltage for external components
    Optional: Serial RS232 port (Accessory: "H-RS232")
    3x perforation for optional WLAN antennas (Accessory: "WLN-M/M1")
  • Other connectors
    Occupied front panel connectors for USB, audio, buttons, LEDs
    1x RS232 serial interface (2x5 pin header, 2.0mm pitch)
    2x fan connectors (4-pin header)
    1x USB 2.0 (4-pin header)
  • Included Accessories
    Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
    Windows 64-bit driver disk
    2x Serial ATA cables
    Thermal pad for one M.2-2280 SSD card
    AC Power Cord (with protective-earth contacts)
    Heatsink Compound
    Protector cap for the CPU socket (do not use if heatpipe or fan is mounted)
    Bag with screws
  • Optional Accessories
    Back panel adapter for serial RS232 port (PCP11)
    WLAN kit supports WLAN+BT with two external antennas (WLN-M (802.11ac) and WLN-M1 (802.11ax))
    Adapter for 2.5" drives such as SSDs (PHD3)
    Adapter cable for external power button (CXP01)
    850W Power Supply (PC850)
  • Environmental criteria
    Permissible ambient temperature during operation: 0~40 °C
    Relative humidity: 10~90 %.
  • Certifications / Compliance:
    EMI: FCC, CE, BSMI, C-Tick
    Safety: CB 60950/62368, cTUVus, BSMI
    Other: RoHS, Energy Star 5.0, ErP
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP).

[1] Online Power Calculator
The PCI Express x16 slot provides a maximum of 75 Watts to the graphics card, plus 75 Watts from the 6-pin connector of the power supply - so the power consumption of the graphics card must not exceed 150 watts. The processor may have a maximum TDP of 125 Watts. If powerful PC components are used, then check with the "Power Supply Calculator" whether the built-in 300 Watt power supply supports this configuration, see: http://global.shuttle.com/support/power. Please also refer to the support list for detailed processor and graphics cards support information at http://global.shuttle.com.
[2] How to convert DisplayPort to HDMI/DVI
One DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[3] Integrated graphics is optional
Processors with model numbers ending with "F" (z.B. Intel Core i5-12600F) do not support integrated graphics, so that the graphics outputs of the Shuttle XPC have no function. In this case, an additional an additional discrete PCIe graphics card is mandatory.
[4] Intel processors of the 14th generation
The Shuttle XPC cube SH610R4 supports Intel Core desktop processors of the 14th generation (codename "Raptor Lake Refresh") since BIOS version 1.03. Attention: To perform the BIOS update, the devices must first be started with a compatible Generation 12 or 13 processor. Download-Website: https://global.shuttle.com/support/download.