- Chassis
Black aluminium chassis
Front panel: brushed aluminium
Front door for I/O ports (USB and Audio)
Kensington Security Slot at the backpanel (also called K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,5 x 19.0 cm (LWH without feet) = 13.6 litre
Height with rubber feet: 19.7 cm
Weight: 3.5 kg net / 4.5 kg gross - Mainboard / Chipset
Mainboard with Shuttle form factor, proprietary design for XPC SH570R8
Chipset/Southbridge: Intel® H570
Passive chipset cooling with heat sink
The Northbridge is integrated in the processor.
Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability - BIOS
AMI BIOS, SPI Interface, 16 MB Flash-EEPROM
Supports Hardware Monitoring, Watch Dog
Supports Power Fail Resume
Supports Firmware-TPM (fTPM) v2.0
Supports boot up from external USB flash memory
Supports Unified Extensible Firmware Interface (UEFI) - Power supply
Built-in 500 Watt mini switching power supply [3]
AC input voltage: 100~240V, 50~60 Hz
80 PLUS Gold compliant
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2-pin
Graphics power connector: 6-pin and 8-pin
Other connectors: 4x SATA, 2x Molex - Operating System
This system comes without operating system.
It is compatible with Windows 10/11 (64-bit) and Linux (64-bit) - Processor support
Processor Socket LGA 1200
Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
Supports the 10th and 11th generation Intel Core processors, code name "Comet Lake-S" and "Rocket Lake-S" in 14++ nm process technology
Maximum supported processor power consumption (TDP) = 125 W
Up to 10 CPU cores, 20 threads and 20 MB of L3 cache
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die.
However, processors with "F" identifier do not support integrated graphics [2]
(performance features depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com. - Heat-pipe processor cooling
Shuttle I.C.E. (Integrated Cooling Engine)
advanced I.C.E. heatpipe technology, linear-controlled 92mm fan
SilentX cooling and noise reduction technology with Active Airflow - Memory support
4x 288-pin slot
Supports DDR4 memory at 1.2V
Supports Dual Channel mode
Supports max. 32 GB per DIMM, maximum total size of 128 GB
The maximum DDR4 clock frequency depends on the processor type used:
- Gen. 11 "Rocket Lake" supports DDR4-3200 (PC4-25600U)
- Gen. 10 "Comet Lake" Core i7/i9 supports DDR4-2933 (PC4-23433U)
- other Gen. 10 "Comet Lake" support DDR4-2666 (PC4-21300U) - PCIe Expansion Slots
1x PCI-Express x16 v4.0 slot
(supports PCI-Express v3.0 with Gen. 10 "Comet Lake" processors)
1x PCI-Express x4 v3.0 slot, open-ended
Supports dual-slot (double-width) graphics cards (occupies the second PCI-Express slot)
The maximum size acceptable for display cards is 280 x 120 x 40 mm.
Graphics power connector: 6-pin and 8-pin [3]
Please refer to the support list for detailed support information at global.shuttle.com. - Integrated Graphics (optional [2])
The features of the integrated Intel UHD graphics function depend on the processor type used.
Certain processor models do not support integrated graphics [2]
The PC features three video outputs which support 2160p/60 UHD resolution:
- 1x HDMI v2.0b (only HDMI v1.4b with Gen. 10 "Comet Lake" Prozessoren)
- 2x DisplayPort v1.4
Supports displays with 4K Ultra HD resolution at 3840 x 2160 (2160p/60)
Supports three independent displays with the integrated graphics function
Supports more displays in combination with a discrete graphics card
Hardware video decoding/encoding
DisplayPort and HDMI support multi-channel digital audio over the same cable - Drive bays
Storage bays: 4x 3.5" (internal)
Using the optional accessory PHD3 two 2.5" drives
can be installed into one 3.5" bay. - SATA connectors
4x Serial ATA 6G connector onboard (rev. 3.0, max. 6 Gbit/s)
Supports Intel Rapid Storage Technology (RST) with RAID 0/1/5/10, JBOD) - M.2-2280M SSD slot
The M.2 2280M slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4, supports NVMe
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface - M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 3.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN extension cards (optional Shuttle accessory: WLN-M) - HD audio
Audio Codec: Realtek ALC897, 5.1 channel
Three analog audio connectors (3.5 mm) on the backpanel:
Line-in (blue), line-out (green) and microphone input (pink)
shared with 5.1 channel line-out (front, rear, center/bass)
Front panel: microphone input and head phone output (line-out) - Dual Gigabit LAN
Dual Gigabit network with two RJ45 ports
1x Intel i210AT - Ethernet Controller with MAC, PHY and PCIe interface
1x Intel i219LM - PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - Front Panel connectors and buttons
Microphone input (3.5 mm)
Headphones output (3.5 mm)
1x USB 3.2 Gen 1 (5 Gbps), Type C
3x USB 3.2 Gen 1 (5 Gbps), Type A, blue
Power button
Power indicator (Blue LED)
Hard disk drive indicator (Yellow LED) - Back Panel connectors
1x HDMI 2.0b (HDMI 1.4b with Gen. 10 "Comet Lake" processor)
2x DisplayPort 1.4 [1]
4x USB 3.2 Gen 2 (10 Gbps), Type A, red
4x USB 2.0 (Type A, black)
2x Gigabit LAN (RJ45)
Audio Line-out (3.5 mm)
Audio Line-in (3.5 mm)
Microphone Input (3.5 mm)
1x 4-pin connector (2.54 mm pitch) supports:
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
Optional: Serial RS232 port (Accessory: "H-RS232")
3x perforation for optional WLAN antennas (Accessory: "WLN-M") - Other connectors
Occupied front panel connectors for USB, audio, buttons, LEDs
1x RS232 serial interface (2x5 pin header)
2x fan connectors (4-pin header)
1x USB 2.0 (4-pin header) - Included Accessories
Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
Windows 64-bit driver disk
2x Serial ATA cables
AC Power Cord (with protective-earth contacts)
Heatsink Compound
Protector cap for the CPU socket (do not use if heatpipe or fan is mounted)
Bag with screws - Optional Accessories
Back panel adapter for serial RS232 port (H-RS232)
WLAN kit supports WLAN+BT with two external antennas (WLN-M (802.11ac) and WLN-M1 (802.11ax))
Adapter for 2.5" drives such as SSDs (PHD3)
Adapter cable for external power button (CXP01)
850W Power Supply (PC850) - Environmental criteria
Permissible ambient temperature during operation: 0~40 °C
Relative humidity: 10~90 %. - Certifications / Compliance:
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP).
[1] How to convert DisplayPort to HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[2] Integrated graphics is optional
Processors with model numbers ending with "F" (z.B. Intel Core i5-11600F) do not support integrated graphics, so that the graphics outputs of the Shuttle XPC have no function. In this case, an additional discrete PCIe graphics card is mandatory.
[3] Online Power Calculator
The PCI Express x16 slot provides a maximum of 75 Watts to the graphics card, plus 75 Watts and 150 Watts from the 6-pin and 8-pin connector of the power supply - so the power consumption of the graphics card must not exceed 300 watts. The processor may have a maximum TDP of 125 Watts. If powerful PC components are used, then check with the "Power Supply Calculator" whether the built-in 500 Watt power supply supports this configuration, see: http://global.shuttle.com/support/power. Please also refer to the support list for detailed processor and graphics cards support information at http://global.shuttle.com.