- Fanless and silent
Passive heatpipe cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must be kept clear.
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer. - IP54 protected
The front panel is dust-protected and protected from
splashing of water according to protection class IP54. - Chassis
Colour: black or white
Dimensions: 391 x 327 x 42 mm (W x H x D)
100mm VESA mount capable
Mounting hole for Kensington lock
Weight: 3.6 kg net, 4.8 kg gross - Operating system
This system comes without operating system.
It is compatible with:
- Windows 10/11 - 64-bit
- Linux - 64-bit - Touchscreen
Touchscreen function supports fingertip input
Resistive 5-wire single-touch technology
Stylus for the built-in touchscreen - 39.6cm display (15.6")
39.6 cm / 15.6" LCD display, ratio: 16:9 wide-screen panel
Resolution: 1366 x 768 = 1.05 Megapixel
Backlight unit: High power LED, Luminance: 220 cd/sqm
Glass thickness: 0.5 mm - Processor
Model: Intel Celeron 4205U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
FCBGA1528 package - directly soldered onto the mainboard
Code name: Whiskey Lake-U (8th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.8 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
TDP wattage: 15 W maximum
Manufacturing process: 3rd-generation enhanced 14nm++
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 - Integrated Graphics
Intel UHD Graphics 610
GPU clock frequency: 300~900 MHz
Execution Units (EUs): 12
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology - Up to three displays simultaneously
Two video ports support two additional independent screens:
1) HDMI 1.4a supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
Special conditions for operation in Multi-Monitor mode:
1) Clone mode: all displays show the same content at 1366x768 resolution
2) Extended mode: all displays show different content - BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports Power fail resume / always on
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports hardware monitoring and Watchdog functionality
Supports Firmware TPM v2.0 functionality - Memory
2x SO-DIMM slot with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered) - Hard disk drive / SSD
Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
Supports one drive with up to 12.5 mm in height - M.2-2280 Slot
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 2.0 X4 with up to 16 Gbps Data Transfer Speed
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 80 mm (type 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) - Card Reader
Integrated card reader supports SD, SDHC and SDXC memory flash cards - Webcam
Integrated 2.0 Megapixel (1600 x 1200) HD webcam - Microphone and speakers
Front panel with integrated Electret Condenser Microphone and
2x 2 W speakers - Integrated Audio
Realtek ALC269 Audio Codec
Two analog audio connectors (3.5 mm) on the bottom side:
1) Line-out (head-phones)
2) Microphone input
Digital Audio is supported via HDMI. - Wired Network
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL) from S3, S4 modes
Supports network boot by Preboot eXecution Environment (PXE) - Prepared for WLAN (optional)
This product comes with two pre-mounted internal WLAN antennas
and has a M.2-2230-E slot for an optional M.2-WLAN card.
The case also features two 6.5 mm perforations for the installation of external WLAN antennas, which must be pruchased separately. - Front LEDs
Power LED (blue)
Hard disk LED (orange) - Connectors left side
Power button
2x USB 3.2 Gen 1 (5 Gbps)
SD card reader
Hole with power button
Hole with Clear CMOS button
Perforation for optional WLAN/LTE antenna (diameter: 6.5 mm) - Connectors bottom side
HDMI 1.4a (supports digital video and digital audio)
2x USB 3.2 Gen 1 (5 Gbps)
2x USB 2.0
Gigabit Network (LAN, RJ45)
Audio Line-out / head-phones (3.5 mm jack)
Microphone input (3.5 mm jack)
DC input for external power adapter (5.5 / 2.5 mm)
Perforation for optional WLAN/LTE antenna (diameter: 6.5 mm)
Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01) - Connectors rear side
VGA connector (D-Sub 15 pol., analog video)
Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01) - Connectors onboard
Internal USB 2.0 type A connector for a USB stick
Serial ATA (6 Gbps)
Serial ATA power connector
3x USB 2.0 header (all occupied)
eDP connector (Embedded DisplayPort) - occupied by the display
Connector for optional COM/LPT adapter POS01 or PCL71 - Power adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% or 19V±5%. - Included Accessories:
Quick Guide
Driver DVD
External Power Adapter (65W / 19V)
Power cord
Serial ATA cable for the 2.5" drive
Screws - Optional Accessories:
PCL71: COM / LPT / RJ11 adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
POS01: COM / LPT / RJ11 adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
- 2x Serial RS232 (8p RJ45)
- 1x DIO/RJ11 connector for cash drawer supports 12 / 24V
PF55: Carrying bag - Environmental criteria
Operating temperature: 0~40 °C
Humidity: 10~90 %, non-condensing - Certification and Compliance
EMI: CE, FCC, BSMI, RCM, VCCI, RED
Safety: CB, BSMI, ETL
Other compliances: RoHS, ErP Lot3, Energy Star v6.0 - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 2014/53/EU Radio Equipment Directive (RED)