- Fanless and silent
Passive heatpipe cooling, absolutely no fan noise
Perfect for noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- If a hard disk or SSD is installed, this must also be approved
for permanent operation by its manufacturer. - IP65 protected
The front panel is protected from dust and jets of water according to protection class IP65. - Chassis
Robust chassis with cover for the I/O connectors
Rear/cable cover and middle frame are all made of Aluminium
Rear cover chassis thickness: 3.0 mm
Colour: dark blue
Dimensions: 543 x 334 x 49.9 mm (W x H x D)
100x100 mm VESA mountable (4x M4x6L screws required)
VESA mount and stand are not included in the scope of delivery.
Net weight: 7.6 kg - Operating system
This system comes without operating system.
It is compatible with:
- Windows ( 64-bit)
- Linux (64-bit) - Touchscreen
Touchscreen function supports fingertip input
Projected capacitive touch panel with 10-point multi-touch
Supports input with gloves (PVC, cotton, cotton/linen)
Stylus pen not supported - 54.6 cm display (21.5")
54.6 cm / 21.5" LC display
Type: a-Si TFT-LCD, VA mode
Ratio: 16:9 wide-screen panel
Native resolution: 1920 x 1080 = 2 Megapixel (Full HD / 1080p)
Viewing angle (left/right/up/down): 89°
Brightness: 300 cd/sqm or nits (typ.)
Contrast: 3000:1 (typ.)
Viewing Angle: 89°/89°/89°/89° (typ.)
Backlight lifetime: 30.000 hours - Processor
8th Gen. Intel Core ULV processor "Whiskey Lake",15W TDP
Available
processorsCores/
ThreadsCache
Clock
(Turbo)vPro
SupportIntel UHD Graphics
Intel Core i7-8665UE
4 / 8
8 MB
1.7~4.4 GHz Yes UHD 620, 300~1150 MHz Intel Core i5-8365UE
4 / 8
6 MB
1.6~4.1 GHz Yes UHD 620, 300~1050 MHz Intel Core i3-8145UE
2 / 4
4 MB
2.2~3.9 GHz - UHD 620, 300~1000 MHz Intel Celeron 4305UE
2 / 2
2 MB
2.0 GHz - UHD 610, 300~1000 MHz
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
FCBGA1528 package - directly soldered onto the mainboard
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 - Integrated Graphics
Intel UHD Graphics 610/620 (features depending on processor model)
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports up to three independent screens:
1) Built-in Full-HD display (supports 1080p/60)
2) HDMI 1.4b Anschluss (supports 1080p/60 and 2160p/30)
3) DVI-I Anschluss (supports 1080p/60)
Note: DVI-I also supports analog VGA displays with an optional adapter - UEFI BIOS
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports booting from M.2 SSD cards and USB devices
AMI BIOS in EEPROM with SPI interface
- Non-vPro version (Consumer) – SPI ROM size is 16MB
- vPro version (Corporate) – SPI ROM size is 32MB
Supports hardware monitoring and Watchdog function
Supports Unified Extensible Firmware Interface (UEFI) - TPM Module
Hardware Trusted Platform Module (Infineon SLB9670VQ2 TPM 2.0) - Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5 mm (outer/inner diameter)
AC mains cable: 3 pins, ca. 1.8 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source with 19V ± 5%. - Wide Range DC-Input (Optional)
The DC input voltage range can optionally be extended to support 9-36 V - Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered) - 2.5" Hard disk drive / SSD Support
Supports one SATA hard disk or one SATA SSD drive
in 6.35 cm / 2.5" format and up to 7 mm in height
The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
The drive can quickly be installed via the swappable drive tray.
No Hot-Swap capability (exchanging during a running operation) - M.2 Slot for SSDs
The M.2 2280 M slot provides the following interfaces:
- PCI-Express Gen. 3.0 x4
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 60 or 80 mm (type 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key) with auto detection - Webcam
Integrated Full-HD 2.0 Megapixel (1920 x 1080) camera - Audio
Audio Realtek® ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) on the back panel:
1) 2 channel line out (headphones)
2) microphone input
Digital multi-channel audio output: via HDMI - Dual Gigabit LAN
Dual network with two RJ45 ports
Used network chips:
1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
2) Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode - Wireless Network (WLAN)
Built-in M.2-2230-E WLAN card with two internal antennas
(external antennas available on request)
WLAN Controller Realtek RTL8821CE
Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
Supports 20 / 40 / 80 MHz channel bandwidth
Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
Supports Bluetooth 4.2 in the 2.4 GHz band - Back Panel connectors (downwards)
Power Button and Easy Rock Switch
HDMI 1.4b (digital video+audio)
DVI-I (video, analog+digital)
4x USB 3.2 Gen 1 Type A (max. 5 Gbps)
2x Intel Gigabit LAN (RJ45, i211/i219LM)
3x Serial Port DB9/D-sub (1x RS232 and 2x RS232/422/485)
(the RS232/422/485 ports supports 5V auxiliary voltage on the RI pin)
Microphone input (3.5 mm)
Audio Line-out / Headphones (3.5 mm)
DC-input connector for external power adapter (19V / 90W)
Perforation (6.5 mm) for an optional potential equalization pin (POAG) - Other connection options
The backpanel has three sections, which can be assigned with other connections.
This requires a modification of the metallic back panel shield.
Available ports: HDMI, DisplayPort, DVI-I, VGA, Quad USB 2.0, COM. - Environmental criteria
Operating temperature: 0 ~ 40 °C
Storage temperature: -20 ~ 60 °C
Permitted relative humidity: 20 ~ 80 % (non-condensing) - Certification and Compliance
EMI: CE, FCC Class A, VCCI, BSMI
Safety: CB, cTUVus, BSMI
RF: EU, US, Taiwan
This device is classed as a technical information equipment (ITE) in Class A. Class A is for products used in commercial and industrial areas. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)
(4) 2014/53/EU Radio Equipment Directive (RED)