• Fanless and Silent
    Equipped with passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 Nonstop Operation
    This device is approved for 24/7 permanent operation.
    Requirement: Free circulation of air amongst the PC must be guaranteed.
  • Chassis
    Durable and rugged chassis made of aluminium and steel.
    Passive cooling system with specially designed fins to maximize heat dissipation.
    Dimensions: 16,9 x 24,5 x 5,7 cm (LWH) = approx. 2,7 litres
    Weight: 2.85 kg net (Barebone without RAM/SSD and optional expansions)
    IP-rating: IP30
  • Operating Position/Mounting
    1) Desktop: The unit can be placed horizontally to stand on its feet.
    2) VESA Mount: The unit can be affixed onto walls or large displays with an optional 75 x 75 mm VESA mount. For this purpose, the VESA mount is screwed onto the top of the BoxPC with four M4x6L screws.
    3) Side Brackets: The unit can be affixed to surfaces with two optional ear-mount brackets and four M4 screws (mounting grid: 256 mm x 100 mm).
    4) DIN-Rail: The unit can be mounted on a standard 35 mm DIN-Rail, e.g. inside equipment racks. The required DIN rail clip must be attached to the underside of the BoxPC with two M3 screws (hole spacing: 47.5 mm).
    Notes: VESA bracket, Ear-Mount and DIN-Rail clip are not included.
    Vertical mounting is permitted in any orientation.
  • Operating System
    This barebone system comes without operating system.
    It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).
  • Processor
    Model: Intel Core i3-8145UE (ULV)
    System-on-a-chip architecture (SoC) with integrated memory and graphics controller
    FCBGA1528 package - directly soldered onto the mainboard
    Code name: Whiskey Lake-U (8th Generation Intel Core)
    Cores / Threads: 2 / 4
    Clock rate: 2.2 GHz, Turbo clock rate: 3.9 GHz
    L3 Smart Cache: 4 MB
    TDP wattage: 15 W maximum
    Manufacturing process: 3rd-generation enhanced 14nm++
  • Integrated Graphics
    Intel UHD Graphics 620
    GPU clock frequency: 300~1000 MHz
    Execution Units (EUs): 23
    Supports up to three independent screens:
    1) HDMI 1.4 on the backpanel
    2) optional HDMI 1.4/2.0, DisplayPort 1.2, DVI-I or D-Sub/VGA (DDI interface)
    3) optional D-Sub/VGA (eDP interface, limitations: no PnP support)
    Supports resume after power failure
    Supports Wake on LAN (WOL)
    Supports Power on by RTC Alarm
    Supports boot from M.2 SSD cards and USB devices
    AMI BIOS in 16 MB EEPROM with SPI interface
    Supports hardware monitoring and Watchdog function
    Supports Unified Extensible Firmware Interface (UEFI)
  • TPM Module
    Hardware Trusted Platform Module (Infineon SLB9670VQ2, TPM 2.0)
  • Power Adapter
    External 150 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz
    Output: 19 V DC, 7.89 A, max. 150 W
    DC Connector: 5.5/2.5 mm (outer/inner diameter)
    AC mains cable: 3 pins, ca. 1.8 m length, with C13/C14 coupler for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
    Note: The DC input voltage range can optionally be extended to support 9-36 V
  • Memory support
    2x SO-DIMM slot with 260 pins
    Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
    Operation temperature range: -40 to +85°C
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,
    maximum total size: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • M.2 Slot for SSDs
    The M.2 2280 M slot provides the following interfaces:
    - PCI-Express Gen. 3.0 x4
    - SATA v3.0 (max. 6 Gbps)
    Operation temperature range: -40 to +85°C
    It supports M.2 cards with a width of 22 mm
    and a length of 60 or 80 mm (type 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key) with auto detect
  • Audio
    Audio Realtek® ALC662 or ALC888S High-Definition Audio
    Two analog audio connectors (3.5 mm) on the backpanel:
    1) 2 channel line out (headphones)
    2) microphone input
    Digital multi-channel audio output: via HDMI and optional DisplayPort
  • Dual Gigabit LAN
    Dual network with two RJ45 ports
    Used network chips:
    1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    2) Intel i219LM PHY connected to the MAC of the processor
    Supports 10 / 100 / 1000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
    Supports Teaming mode
  • Back Panel connectors
    Power Button
    HDMI 1.4
    4x USB 3.2 Gen 1 Type A (max. 5 Gbps)
    2x Intel Gigabit LAN (RJ45, i211/i219LM)
    Serial COM port ( RS232)
    Microphone input (3.5 mm)
    Audio Line-out / Headphones (3.5 mm)
    DC-input connector for external power adapter
  • Optional Front Panel connectors
    The front panel is subdivided into four sections to support optional expansion kits with daughter boards in order to add I/O ports. The following accessory kits can be pre-installed by Shuttle upon request for an additional charge:
    1) second graphics port: HDMI 1.4/2.0, DisplayPort 1.2 or D-Sub/VGA
    2) third graphics port: D-Sub/VGA
    3) one COM port RS232
    4) two COM ports RS232/RS422/RS485 (occupies two sections)
    5) 4x USB 2.0 - can be installed twice (Note: USB 2.0 ports allow up to 500mA/2.5W power output, but if only low power devices like mouse/keyboard are connected, then up to 4 USB kits can be used)
  • Further optional accessories
    1) Wide range DC-input 9~36 V (instead of only 19 V)
    2) Ear mount brackets (mounting dimensions: 256 mm x 100 mm)
    3) WLAN 802.11n/ac and BT 4.0 (RTL8821CE) with two external antennas
  • Environmental Specifications
    Operating temperature range: -20 ~ +60 °C
    Relative humidity, non-condensing: 0~90 %
    Note: this Box-PC requires industrial-grade RAM modules and M.2 SSDs with an operation temperature range of -40 to +85°C.
  • Conformity & Certifications
    EMI: CE, FCC Class A, VCCI, RCM
    Safety: CB, cTUVus
    Other: RoHS, CEC
    This device is classed as a technical information equipment (ITE) in Class A , Class A is for product used in commercial and industrial areas. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)