• Fanless and Silent
    Equipped with passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 Nonstop Operation
    This device is approved for 24/7 permanent operation.
    Requirement: Free circulation of air amongst the PC must be guaranteed.
  • Chassis
    Durable and rugged chassis made of aluminium and steel.
    Passive cooling system with specially designed fins to maximize heat dissipation.
    Dimensions: 16,9 x 24,5 x 5,7 cm (LWH) = approx. 2,7 litres
    Weight: 2.85 kg net (Barebone without RAM/SSD and optional expansions)
    IP-rating: IP30
  • Operating Position/Mounting
    1) The unit can be placed horizontally to stand on its feet
    2) The unit can be affixed to a 75 mm x 75 mm VESA bracket. For this purpose, four M4x6L screws are required to be screwed into the chassis from the top.
    3) The unit can be mounted using two optional 256 mm x 100 mm ear-mount brackets. For this purpose, four M3x6L screws are required to be screwed into the chassis from the bottom.
    4) Mounted on a standard 35 mm DIN-Rail, e.g. inside equipment racks
    Notes: VESA bracket, Ear-Mount and DIN-Rail clip are not included.
    Vertical mounting is permitted in any orientation.
  • Operating System
    This barebone system comes without operating system.
    It is compatible with Windows 10 (64-bit) and Linux (64-bit).
  • Processor
    8th Gen. Intel Core ULV processor "Whiskey Lake",15W TDP






    Intel UHD Graphics

    Intel Core i7-8665UE 4 / 8 8 MB 1.7~4.4 GHz Yes UHD 620, 300~1150 MHz
    Intel Core i7-8565U 4 / 8 8 MB 1.8~4.6 GHz - UHD 620, 300~1150 MHz
    Intel Core i5-8365UE 4 / 8 6 MB 1.6~4.1 GHz Yes UHD 620, 300~1050 MHz
    Intel Core i5-8265U 4 / 8 6 MB 1.6~3.9 GHz - UHD 620, 300~1100 MHz
    Intel Core i3-8145UE 2 / 4 4 MB 2.2~3.9 GHz - UHD 620, 300~1000 MHz
    Intel Celeron 4305UE 2 / 2 2 MB 2.0 GHz - UHD 610, 300~1000 MHz

    System-on-a-chip architecture (SoC) with integrated memory and graphics controller
    FCBGA1528 package - directly soldered onto the mainboard
    Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
  • Integrated Graphics
    Intel UHD Graphics 610/620 (features depending on processor model)
    Supports up to three independent screens:
    1) HDMI 1.4 on the backpanel
    2) optional HDMI 1.4/2.0, DisplayPort 1.2 or DVI-I (DDI interface)
    3) optional D-Sub/VGA (eDP interface, limitations: no PnP support)
    Supports resume after power failure
    Supports Wake on LAN (WOL)
    Supports Power on by RTC Alarm
    Supports boot from M.2 SSD cards and USB devices
    AMI BIOS in EEPROM with SPI interface
    - Non-vPro version (Consumer) – SPI ROM size is 16MB
    - vPro version (Corporate) – SPI ROM size is 32MB
    Supports hardware monitoring and Watchdog function
    Supports Unified Extensible Firmware Interface (UEFI)
  • TPM Module
    Hardware Trusted Platform Module (Infineon SLB9670VQ2 TPM 2.0)
  • Power Adapter
    External 90 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz
    Output: 19 V DC, 4.74 A, max. 90 W
    DC Connector: 5.5/2.5 mm (outer/inner diameter)
    AC mains cable: 3 pins, ca. 1.8 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    Note: The DC input voltage range can optionally be extended to support 9-36 V
    Note: for 150W / 7.89A power adapter for -20 ~ +60 °C temperature range on request (BPCWL03)
  • Memory support
    2x SO-DIMM slot with 260 pins
    Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,
    maximum total size: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • M.2 Slot for SSDs
    The M.2 2280 M slot provides the following interfaces:
    - PCI-Express Gen. 2.0 X1
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 60 or 80 mm (type 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key) with auto detect
  • Audio
    Audio Realtek® ALC 662 High-Definition Audio
    Two analog audio connectors (3.5 mm) on the backpanel:
    1) 2 channel line out (headphones)
    2) microphone input
    Digital multi-channel audio output: via HDMI and optional DisplayPort
  • Dual Gigabit LAN
    Dual network with two RJ45 ports
    Used network chips:
    1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    2) Intel i219LM PHY connected to the MAC of the processor
    Supports 10 / 100 / 1000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
    Supports Teaming mode
  • Back Panel connectors
    Power Button
    HDMI 1.4
    4x USB 3.2 Gen 1 Type A (max. 5 Gbps)
    2x Intel Gigabit LAN (RJ45, i211/i219LM)
    Serial COM port ( RS232)
    Microphone input (3.5 mm)
    Audio Line-out / Headphones (3.5 mm)
    DC-input connector for external power adapter
  • Optional Front Panel connectors
    The front panel is subdivided into four sections to support optional expansion kits with daughter boards in order to add I/O ports. The following optional accessory kits are available:
    1) second graphics port: HDMI 1.4/2.0, DisplayPort 1.2 or D-Sub/VGA
    2) third graphics port: D-Sub/VGA
    3) 4x USB 2.0 (can be installed twice)
    4) one COM port RS232
    5) two COM ports RS232/RS422/RS485 (occupies two sections)
  • Further optional accessories
    1) Wide range DC-input 9~36 V (instead of only 19 V)
    2) Ear mount brackets (mounting dimensions: 256 mm x 100 mm)
    3) WLAN 802.11n/ac and BT 4.0 (RTL8821CE) with two external antennas
  • Environmental Specifications
    Operating temperature range: 0~40 °C
    Relative humidity, non-condensing: 0~90 %
    Industrial grade temperature range: -20 ~ +60 °C on request only (Model BPCWL03)
  • Conformity & Certifications
    EMI: CE, FCC Class A, VCCI, RCM, BSMI*
    Safety: CB, cTUVus, BSMI*
    Other: RoHS, ErP, CEC
    * BSMI only available for standard operating temperature (0 ~ 40 °C)
    This device is classed as a technical information equipment (ITE) in Class A , Class A is for product used in commercial and industrial areas. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)