Slim X-type chassis, colour: black
Dimensions: 238 x 200 x 72 mm (LWH) = 3.5-litre
Weight: 2.2 kg net, 3.5 kg gross
Open front - without covers for optical drive and front panel connectors
Hole for Kensington Lock at the back panel
Operation position horizontal or even vertical with the optional stand PS01
- Storage Bays
This system features three drive bays:
1) supports one optical drive (ODD) in 5.25" slimline format with max. 12.7 mm height - this bay can alternatively be used for a 2.5" drive
2) upper 2.5" bay supports one 2.5" drive with max. 12.7 mm height
3) lower 2.5" bay supports one 2.5" drive with max. 9.5 mm height
The system includes the following pre-installed cables:
- 2x Power cable for 2.5" drives (5 Volt )
- 1x SATA cable for one 2.5" drive
- 1x combo connector (SATA and power) for an optical slimline drive (DVD or Blu-ray)
Important note: This system is ready for one 2.5" drive (SSD or hard disk) and one DVD/Blu-ray drive in slimline format to be installed.
For further 2.5" drives, additional SATA cables and screws are required. For a possible third 2.5" drive also a Y power cable is required. (All not included)
- Operation System
This system comes without operating system.
It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
Note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel Core processors "Skylake".
Additional note on Windows 7 see 
- Mainboard / Chipset / BIOS
Mainboard FH110V, Mini-ITX form factor 17 x 17 cm, 8 layer design
Chipset: Intel® H110 Chipset
(Intel® GL82H110 PCH, Codename "Sunrise Point")
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, max. 4.74 A, max. 90 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7m
DC Connector: 5.5 / 2.5mm (outer/inner diameter)
Note: This system can also be powered by a power adapter with an output voltage of 12V DC.
- Processor support
Socket LGA 1151 (H4) supports
Intel Core i7 / i5 / i3, Pentium and Celeron processors
- 6th generation, code name "Skylake"
- 7th generation, code name "Kaby Lake" 
Maximum supported processor power consumption (TDP) = 65W
14nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
- Processor heat-pipe cooling
Processor cooling with heat-pipe technology and two fans (6cm)
- Memory support
2x SO-DIMM slot with 204 pins
Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V 
Supports Dual Channel mode
Supports max. 16 GB per DIMM, maximum total size of 32 GB
Supports two unbuffered DIMM modules (no ECC)
- Integrated Graphics
The features of the integrated Intel HD graphics function
depend on the processor type used.
Supports DirectX 12, OGL 5.x, OCL 2.x
The PC features the following video outputs:
- HDMI v1.4 (supports 1080p/60 and 2160p/30)
- DisplayPort v1.2 (supports 1080p/60 and 2160p/60)
- optional: VGA / 15-pin D-Sub (supports analog video)
Supports displays with 4K Ultra HD resolution at 3840 x 2160
Supports two independent displays simultaneously
Supports Blu-ray (BD) playback with HDCP content protection 
DisplayPort and HDMI support multi-channel digital audio over the same cable
Maximum shared memory of 1760 MB
- 5.1-channel audio
Audio Realtek® ALC 662 5.1-channel High-Definition Audio
Three analog audio connectors (3.5mm) at the back panel:
1) Front line-out (head-phones)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with line-in)
Digital multi-channel audio output: by HDMI and DisplayPort
- Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
2) Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode 
- M.2-2280 BM Slot
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express v2.0 X4
- SATA v3.0 (6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCIe interface.
- M.2-2230 AE Slot
The M.2 2230 AE slot provides the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and other. A SATA interface for SSD cards is not available here.
- Drive connectors
3x Serial-ATA connector, max. 6 Gbps
Supports Intel® Rapid Storage Technology 13 (RST)
Supports NCQ and AHCI
Note: The package includes pre-installed cables (for SATA and power) and mounting screws for one 2.5" drive and one optical slimline drive.
- Front Panel connectors
Audio Line-out (head phones)
2x USB 3.0
2x USB 2.0
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
1x DisplayPort 1.2 audio/video output 
1x HDMI 1.4 audio/video output
2x USB 3.0
2x USB 2.0
2x GigaBit LAN (RJ45)
1x COM (RS232)
1x COM (RS232/422/485)
3x Audio 3.5mm (Line-in, Line-out, Mic-in)
1x PS/2 Combo port (supports keyboard and mouse) 
1x Clear CMOS Button
2x Perforation for Wireless LAN antennas
1x Hole for Kensington Lock
- Other onboard connectors
Power on after power fail (hardware solution by jumper) 
Front connectors for power button, LEDs, USBs, audio ports
USB 2.0 headers (5-pin)
RS232 COM port (2x10-pin header - occupied)
Two 4-pin fan connectors (one occupied by the CPU cooling system)
LPC interface (2x10-pin header, 2 mm pitch)
- Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
Pre-installed SATA and power cables for one 2.5" drive and one slimline drive
External power adapter with 1.7m AC power cord (with protective-earth contacts)
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system with heatsink compound
Bag with screws
- Optional Accessory
(1) Vertical stand (PS01)
(2) VESA mount (PV02)
(3) WLAN module (WLN-M) 
(4) 3.5" Hard Disk Rack (PHD4) 
(5) D-Sub/VGA port adapter (PVG01) 
- Environmental Specifications
Operating temperature range: 0~50°C 
Relative humidity range: 10~90% (non-condensing)
- Conformity and Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing the appropriate jumper, the system will start unconditionally once power is supplied.
 How to convert DisplayPort into HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 For Blu-ray playback appropriate software and a Blu-ray drive is required (not included).
 Optional Wireless LAN module:
This Slim PC supports an optional WLAN module which consists of an M.2 expansion card with IEEE 802.11ac, Bluetooth 4.0 functionality and two external antennas with appropriate cables. Shuttle offers its suitable accessory kit "WLN-M".
 4K Ultra-HD resolution
A 4K-display with Ultra HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. Certain displays (e.g. Dell UP2414Q) however require MST mode (Multi-Stream Transport) to be enabled which sends two separate images at half resolution each to the display. These two images are then combined and put in correct order by the Intel graphics driver when in Collage mode. Please note that HBR2-mode (High Bit Rate 2) must be supported by each display to have two of them run at 4K resolution.
The video playback performance depends on the video format, bit rate and the processor used. Daily office applications usually won't require the system to run under full load, however for smooth 4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is required here, since the performance of the integrated graphics engine of a Celeron or Pentium processor does not suffice.
 Optional D-Sub/VGA connector
The mainboard features one analog graphics port. This 15-pin D-Sub VGA connector can be lead to the outside of the backpanel by using an optional adapter PVG01. However doing so means one serial port (COM2) less can be used at the backpanel.
 High ambient temperature
For high ambient temperature over 40°C we strongly recommend to use SSDs instead of hard disk drives.
 The optional accessory PHD4 allows for installation of one 3.5" hard drive. However doing so means no other drives such as a slimline DVD drive or a 2.5" HDD/SSD can be used.
 Power connector for SATA drives
The supplied power cables for SATA drives provide a voltage of 5V. Only in very exceptional cases a 2.5" hard disk also requires a 12V line, which is not supported out-of-the-box (only via an optional adapter, included by PHD4).
 Teaming Mode
The teaming function allows for grouping both available network adapters to work as one single adapter. The benefit of this approach is that it enables load balancing and failover.
Driver download: <https://downloadcenter.intel.com/download/21642>
 Why may the PS/2 port help install Windows 7?
The Intel® 100 chipset series has done away with support for the Enhanced Host Controller Interface (EHCI) which is the driver software for the USB 2.0 ports. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like keyboard, mouse and external optical drive) will not work during Windows 7 Installation. There are two solutions: (1) use a PS/2 keyboard or a PS/2 mouse and install Windows 7 from an internal Slimline DVD drive or (2) add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at global.shuttle.com.
 Memory compatibility
This mainboard supports DDR3L-1333/1600 SO-DIMM memory modules. DDR3L has a lower operation voltage (1.35V) compared to DDR3 (1.5V). However, some modules are approved for both voltages.
Memory modules that are designed for higher frequencies can also be used. The installed modules then run as DDR3L-1600.
An SO-DIMM is a small outline version of a DIMM. These are particularly designed for small PCs and laptops where full-size DIMMs wouldn't fit.
 Kaby Lake processor support
The 7th generation Intel Core processors "Kaby Lake" are supported from BIOS version XH110V00.114 which is available since 2017-02-10. Download website: http://global.shuttle.com/support/download
Note: If a Kaby Lake processor is used, this XPC will only support Windows 10 and Linux operating systems. Windows 7 and 8.1 will no longer be supported.