• Chassis
    H7-type aluminum chassis, color: black
    Storage bays: 1 x 5.25", 2 x 3.5" (1 external)
    Stealthed drive doors
    Dimensions: 32.6 x 20.8 x 18.9/19.6 cm (LWH) without/with rubber feed
    Volume: 12.8 litres
    Weight: 4.2 kg net / 5.5 kg gross
  • Mainboard
    Mainboard FX58 Pro, Shuttle form factor
    Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Controller Hub)
    Solid Capacitors for excellent heat resistance and enhanced 
    system durability, much better than aluminum electrolytic capacitors
  • Power supply
    500 Watt mini PSU, AC input voltage: 100~240V
    80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
    Active PFC circuit (Power Factor Correction)
    ATX power connectors: 20 pin + 8 pin (12V)
    Graphics card power connector: 6 pin (75W) and 6+2 pin (150W)
    Other connectors: 3x SATA, 2x Molex, 1x Floppy
  • Processor support
    Supports the following Intel® Xeon™ processors with Socket 1366:
    • 1) Intel® Xeon® Processor E5506 (Nahalem-EP)
      2.13 GHz, 4 Cores, 4 Threads, 4M Cache, 45nm, 80W TDP
    • 2) Intel® Xeon® Processor W3565 (Bloomfield)
      3.20/3.46 GHz, 4 Cores, 8 Threads, 8M Cache, 45nm, 130W TDP
  • Heatpipe processor cooling
    Shuttle Integrated Cooling Engine (I.C.E.) with efficient heat-pipe technology
  • Memory support
    4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
    Supports DDR3-1066/1333 SDRAM memory (PC3-8500/10600)
    Supports DDR3-1600 (PC3-12800) in overclocking mode *)
    Max. 4 GB per DIMM,  up to a total size of 16 GB
    Warning: DIMMs with voltage over 1.65V may damage your CPU. 
    Shuttle recommends to install the DIMMs with voltage setting below 1.6V.
  • Slots
    2x PCI-Express x16 Version 2.0 expansion slots 
    for x16 graphics cards (full 16 lanes each slot)
    Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology. 
    Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
    Supports two single-slot or one double-width graphics card.
    1x Mini-PCIe x1 slot for an optional WLAN module
  • 8-channel audio
    7.1 channel High Definition Audio with Realtek ALC888 codec
    Analog audio: line-out (8-ch), line-in, microphone, Audio AUX-in (onboard)
    Digital audio: optical S/PDIF output
  • Dual Gigabit LAN Controller
    2x RJ45 connectors supports Teaming-Mode**)
    Realtek 8111E Ethernet network controller
    IEEE 802.3u 1000Base-T compliant
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports Wake-on-LAN
  • Drive connectors
    2x internal Serial-ATA, 6 Gbit/s data transfer rate
    2x internal Serial-ATA, 3 Gbit/s data transfer rate
    2x external Serial-ATA, 3 Gbit/s data transfer rate (1x front, 1x rear)
    Power connector for eSATA hard disks (incl. cable)
    Intel Matrix Storage Technology enabled striping and mirroring
    Supports RAID mode 0 and 1
    Remark: the Raid driver currently supports the 3G ports only.
    Supports AHCI und Native Command Queuing (NCQ)
  • Front Panel connectors
    Microphone
    Headphone (Line-out)
    2x USB 3.0
    eSATA / USB 2.0 combo port
    Power button
    Reset button
    Power LED indicator
    HDD LED indicator
  • Back Panel connectors
    8x USB 2.0
    2x GigaBit LAN (RJ45)
    1x External Serial ATA Hotplug (eSATA)
    Power connector for eSATA hard disks (incl. cable)
    8-ch Audio line-out (2x front, 2x rear, bass/center, surround/back)
    Audio Line-in
    Digital audio: optical S/PDIF output
    Clear CMOS button
  • Onboard connectors
    1x USB 2.0 (1x5 pin header)
    2x fan connectors (4 pins and 3 pins)
    1x Digital Audio S/PDIF output (3 Pins, occupied)
    1x Audio AUX input (analog)
    1x RS-232 COM port (2x5 pin header)
  • Accessories
    Driver DVD ROM
    Quick Installation Guide (multi-language)
    2x SATA cables (pre-installed)
    External SATA (eSATA) cable
    One 2x2 pin power cable for eSATA hard disks
    1x Power cord
    Screws
    Heatsink compound
  • Conformity
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    living room and office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.

© 2019 Shuttle Computer Handels GmbH | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap