Expansion kit for DL10J to install a LTE/4G card
If you want integrated mobile network on your Shuttle XPC slim Barebone DL10J, then you need the Shuttle XPC accessory WWN01. This kit includes a riser adapter card to support a LTE/4G module and a Nano SIM card for mobile network. The riser card is to be installed into the M.2-2230 slot and replaces the pre-installed WLAN card. Two antennas with cables are also included in the delivery.

  • Contents:
    - M.2 adapter card LN004
    - Fastening screw for LTE/4G card (two-parts)
    - 2x LTE/4G antennas
    - 2x antenna cables with toothed lock washer and screw nut
    - Quick installation guide
  • Adapter card:
    Riser card for the M.2-2230 Key E slot
    Dimensions: 30 x 30 mm
    - supports one LTE/4G module M.2-3042 Key B
    - supports one SIM card in Nano format
  • Two external antennas:
    LTE/4G dipole omnidirectional antenna
    Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
    Colour: black
    Length overall: 135.7 mm
    Dimensions of the antenna body: 114.8 mm x 20.1 mm
    Impedance: 50 Ohm
    Voltage Standing Wave Ratio (VSWR): <= 3.0
    Radiation: Omni
    Gain: 2 dBi
    Polarisation: vertical
    Connector: SMA
  • Two antenna cables:
    RF cable lengths: 20 cm
    1) SMA Pigtail female
    2) I-PEX MHF 4
  • Compatibility:
    The WWN01 can be used for
    - Shuttle XPC slim DL10J
    Note that two more components are required for operation:
    - LTE/4G module M.2-3042 Key B
    - SIM card in Nano format
    Successfully tested LTE/4G modules:
    - Sierra EM7455 (CAT 6, for Europa and North America)
    - Sierra EM7430 (CAT 6, for APAC)
    - Huawei ME906S (CAT 4, for EMEA, Australia, New Zealand)
    - Quectel EM06-E (CAT 6, for EMEA, Australia, Brazil)
2020 Shuttle Computer Handels GmbH | Informazione legale | Contatto | CGC | Informativa privacy | Sitemap