• Chassis
    Black aluminium chassis
    Front panel: glossy plastic with horizontal line texture
    Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external)
    With the optional accessory PHD3 two 2.5" drives
    can be installed into one 3.5" bay.
    Front doors for I/O ports and storage drives
    Kensington Security Slot at the back panel (also called K-Slot
    or Kensington lock) as a part of an anti-theft system
    Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litre
    Weight: 3.5 kg net / 5.0 kg gross
  • Mainboard / Chipset
    Shuttle "FH97", Shuttle form factor
    proprietary design for XPC Barebone SH97R6
    Dimensions: 270 x 195 mm
    Chipset: Intel® H97 Chipset
    (Intel® DH82H97 PCH, code name "Wildcat Point")
    Platform Controller Hub (PCH) as Single-Chip-Solution
    Passive chipset cooling with heat sink
    The Northbridge is integrated into the processor.
    Solid Capacitors for sensitive areas provide excellent
    heat resistance for enhanced system durability
  • BIOS
    AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
    Supports PnP, ACPI 3.0, Hardware Monitoring
    Supports Unified Extensible Firmware Interface (UEFI) [3]
    Supports boot up from external USB flash memory
  • Power supply
    Built-in 300 Watt mini switching power supply (PC61J)
    AC input voltage: supports 100~240V, 50~60 Hz
    80 PLUS® Bronze compliant: the PSU provides at least
    82/85/82% of efficiency at 20/50/100% of load.
    Active PFC circuit (Power Factor Correction)
    ATX main power connectors: 2x10 and 2x2-pin
    Graphics power connector: 6-pin
    Other connectors: 4x SATA, 2x Molex, 1x Floppy
  • Operation System
    This system comes without operating system.
    It is compatible with Windows 8 / 8.1, Windows 7 and Linux
  • Processor support
    Socket LGA 1150 (H3) supports the fourth generation of
    Intel Core i7 / i5 / i3, Pentium and Celeron processors
    Maximum supported processor power consumption (TDP) = 95W
    Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache
    Supports "Haswell Refresh" processors.
    Not compatible with older Socket LGA 1155 processors.
    Does not support the unlock-function of Intel K-Series processors.
    The processor integrates PCI-Express, memory controller
    and the graphics engine on the same die (performance features 
    depending on processor type)
    Please refer to the support list for detailed processor support information at global.shuttle.com.
  • Processor cooling
    Shuttle I.C.E. (Integrated Cooling Engine)
    Advanced I.C.E. Heatpipe technology with 3 pipes
    Temperature controlled 92 mm fan
    SilentX cooling and noise reduction technology with Active Airflow
  • Memory support
    4 x 240-pin slots
    Supports DDR3-1600/1333 SDRAM memory (PC3-12800/10600) [2]
    Supports 2+2 Dual Channel mode
    Supports max. 8 GB per DIMM, maximum total size of 32 GB
  • Integrated Graphics
    The features of the integrated Intel HD graphics function 
    depend on the processor type used.
    Supports OpenCL 1.2, DirectX 11.1, OpenGL4.1 and DX extensions,
    SH97R6 features three digital video outputs [11]:
    - HDMI v1.4 (supports 1080p/60 and 2160p/30)
    - 2x DisplayPort v1.2 (support 1080p/60 and 2160p/60)
    Supports displays with 4K Ultra HD resolution at 3840 x 2160 [8]
    Supports three independent FullHD displays with the integrated graphics function
    Supports more displays in combination with a discrete graphics card [7]
    Supports Blu-ray (BD) playback with HDCP content protection
    Supports multi-channel digital audio over the same cable
  • PCIe Expansion Slots
    1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
    1x PCI-Express x4 v2.0 slot
    This XPC supports dual-slot (double-width) graphics cards -
    in this case the second PCI-Express slot will be occupied.
    Graphics power connector: 6-pin
  • Mini PCIe Slots
    This XPC features two Mini PCI Express expansion slots:
    1) half-size, supports PCIe 2.0 and USB 2.0, e.g. for WLAN cards [4]
    2) full-size, supports PCIe 2.0, SATA 3.0 (6 Gbps) and USB 2.0
    e.g. for Mini SATA (mSATA) flash memory cards [5]
  • 7.1-channel HD audio
    7.1 channel High Definition Audio with Realtek ALC892 codec
    Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
    Digital Audio via HDMI and DisplayPort outputs
  • Gigabit LAN
    Realtek RTL 8111G Ethernet network controller
    PCI Express interface
    IEEE 802.3u 1000Base-T compliant
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports Wake-on-LAN (WOL)
  • SATA connectors
    4x Serial ATA, max. 6 Gbps (onboard)
    1x External Serial ATA (eSATA), max. 3 Gbps (back panel)
    Supports Intel Rapid Storage Technology (RST 12, Raid 0/1/5/10, JBOD)
    1x mSATA Mini-Slot for flash memory cards, max. 6 Gbps [5]
    Supports Smart Response Technology (SRT, "SSD Caching")
  • Front Panel connectors and buttons
    Microphone input
    Headphone output (line-out)
    2x USB 3.0
    2x USB 2.0 (1x Quick charge with up to 2A) [9]
    Power button
    Power indicator (blue LED)
    Hard disk drive indicator (yellow LED)
  • Back Panel connectors
    HDMI v1.4
    2x DisplayPort v1.2 [10]
    2x USB 3.0
    4x USB 2.0
    GigaBit LAN (RJ45)
    External Serial ATA (eSATA 3Gb/s)
    7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
    Audio Line-in
    Clear CMOS button
    Optional: serial port RS-232 (Accessory: H-RS232)
    3x perforation for optional WLAN antennas [4]
  • Other connectors
    4x USB 2.0 (two 2x5-pin, one set is occupied)
    1x RS232 (2x5-pin) for optional accessory H-RS232
    2x fan connectors (4 pins), one connector is occupied
    Audio AUX input / Line-in (4-pin)
    Low Pin Count header (LPC, 2x 10 pins, 2 mm pitch size)
    Digital Audio S/PDIF header (3-pin)
    Occupied front connectors: USB 3.0/2.0, audio, power buttons, LEDs
  • Included Accessories
    Multilanguage XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
    32/64 bit driver disk
    2x Serial ATA cables
    Power Cord
    Heatsink Compound
    Protector for CPU socket (do not use, if heat-pipe or fan is mounted)
  • Optional Accessories
    PHD3 - 3.5" to 2.5" adapter
    H-RS232 - Backpanel COM port adapter for RS232 serial interface
    WLN-C- Wireless LAN 802.11n module with external antennas [4]
    PC63J - 500W power supply, 80 PLUS® Silver
  • Environmental Spec
    Operating temperature range: 0~35°C
    Relative humidity range: 10~90% (non-condensing)
  • Certifications / Compliance
    EMI: FCC, CE, BSMI, C-Tick
    Safety: ETL, CB, BSMI, TÜV
    Other: RoHS, ErP 2013 Lot 6, Energy Star 5
  • Conformity
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    the living room or office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits


[1] Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the settings in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
[2] The memory is directly connected to the processor and you can use DDR3-1333 and DDR3-1600 memory modules. Almost all compatible processors support both clock rates. However, Celeron and some Pentium processors are limited to 1333 MHz memory clock rate, but you can still use DDR3-1600 memory modules in this case.
[3] The Unified Extensible Firmware Interface (UEFI)
is required when booting from hard disks larger than 2.2 TB.
[4] Optional Wireless LAN module
This XPC supports the optional Shuttle XPC Accessory WLN-C which consists of a half-size Mini-PCIe card with IEEE 802.11n functionality up to 300 Mbit/s data transfer rate and and two external antennas with appropriate antenna cables.
[5] mini-SATA (mSATA)
Do not confuse with "micro SATA". mSATA is a newer industry standard which converts the electrical SATA interface to the pysical "Mini PCI Express" mini card form factor. Applications include mobile devices that require a smaller solid state drive and mainboards that use Intel's Smart Response Technology (SRT).
[6] Intel Smart Response Technology (SRT, formerly "SSD caching")
The Shuttle XPC Barebone SH97R6 supports the Intel Smart Response Technology which allows a SATA solid state drive (SSD) to work as a cache for a conventional hard disk drive (HDD). This allows users to experience system performance similar to SSD-only systems. The maximum cache size is 64 GB.
[7] SH97R6 supports additional displays in combination with a discrete graphics card
The integrated graphics function already supports three independent displays via its digital video outputs. The SH97R6 can even support more displays in combination with a discrete PCI-Express graphics card. This function is based on the Switchable Graphics feature introduced with the 2nd Generation of Intel® Core™ processors. To enable this, please enter the BIOS Setup Utility by pressing the "Delete" key after powering on the PC, then go to the "Advanced" tab and change the "Initiate Graphics Adapter" setting to "Switchable".
[8] 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. The video playback performance depends on the video format, bit rate and the processor used. Daily office applications usually won't require the system to run under full load, however for smooth 4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is recommended here, since the performance of the integrated graphics engine of a Celeron or Pentium processor might not suffice.
[9] Right Front USB port with Quick Charge feature
Quick charge Apple iPhone/iPad devices with up to 2A under Windows XP,Windows 7 and 8 (not under Linux).
[10] How to convert DisplayPort into HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[11] Three independent displays simultaneously
The DS87 supports a maximum of two displays with a DVI or HDMI input. A third digital display, if required, must be connected directly to the DisplayPort output (without an adapter).

© 2020 Shuttle Europe | Informazione legale | Contatto | CGC | Informativa privacy | Sitemap